Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I pulled the trigger. One is inbound to me. Received the Edelbrock Performer intake yesterday. Pics when things happen. :fsj:
Last post
I have not read this entire thread, so I apologize if I'm stepping on good advice already out there - but I have about 8k miles on my Sniper in my CJ...
Getting ready to swap to an Edelbrock manifold and install TBI. Realized if I think ahead then maybe will find more enjoyment upon completion.
Two...
Last post
The good thing about our rigs is if the motor is fairly stock, then a stock sbc 350 tune will get it running good enough to start tuning from what I...
Good morning to all of you
Have patience I write from Venice - Italy, this is my first post, but 2 years that I follow you and read, and thanks to a...
I am getting ready to add in the timing control feature on my Holley Sniper. I have an MSD Ignition System (ready to run). I have read that a lot of...
Last post
Very new but, these guys bought all stock so get them here:
Hey guys, I am swapping a LM7/4L60E/NP246 into my grand wagoneer. I saw a thread on here a while ago of someone who used the electric shift NP246 and...
I’m in the process of installing VSS to my current fuel only setup. I found out today that I’m missing wire to terminal A10 in my harness. How do I...
Last post
Thank you babwag for the suggestion. I was able to relocate compressor status to A10 pin for the VSS. I now have VSS and IAC is working much better....
I know... KNOW I’m going to be mis-stating, mid-speaking, and definitely mistaking in this thread. But I guess it’s bound to happen, venturing into...
Last post
Its been a while but I think the only difference between the two is the injector size. You will be fine with the 350 unit. I ran them for years on my...
Since the Novak drop in didn't work for me, I have to make my own 3/8 Feed line.
I have a stock pickup, and am in the process of fitting the line. In...
Last post
Are you using a brake line fitting and a double flare? What are you attaching it to?
Russell 640610 (-6AN) to 5/8 -18 Specialty Fuel Adapter Fitting
Ideally you want the electric fuel pump close to the tank and mounted as low as practical. Inside the frame channel where the factory fuel lines run...
Last post
Did you buy it second hand? Call the manufacturer and see if you can buy an installation manual.
Oh yeah. Jeep did great 150 mile round trip. Except when we did a little slow wheelin to get to the top and idled for a few minutes to take some pics...
Last post
On FiTech website they say not to use the FCC in off road applications, guess this is why. Just bought the FiTech go street and the Novak pump myself...
So I was able to register my jeep as a classic in Arizona which means that I can go ahead with my planned emmisions delete with that said has anyone...
Last post
I insured with state farm and pay 125.00 a year.Classic, no smog needed.
Yea I don't have the best driving record
Hey guys so I'm new to the fsj world I have a 360 I'm toying with throwing intake cam and heads at. Is the summit cam any good. I'm leaning to Howell...
Last post
Already answered in your other post, but since you're also looking at getting the heads done, talk to your engine rebuilder. He or she should be able...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
