Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I'm looking for a pair of front mats like the Husky's that have a water catching lip all the way around for my Chief.
I called Husky but all they can...
I'd appreciate some wisdom/advice from someone who has done this before. I'm a newbie, have never hung a motor before, and I'm stuck on where to weld...
Last post
I'm trying not to trim any...I'd like to keep the fender flares intact. How much lift will that take?
This is a continuation of a thread from a few weeks ago where I questioned my wheels riding very close to my tie rods. I understand that the tie rods...
Last post
your welcome!
If your patient these might be for sale this summer if I can find a 17 wheel that I like that isn't $600ea.
I have factory slotted wheels, 15 x 7 on my 77 Cherokee.
I am changing to 15 x 8 and found an aftermarket slotted wheel (US Mag U101) that resembles...
Last post
I planned on selling the wheels but it might be a few months. Mine are painted argent and the inside slots painted black. This was done by the PO but...
HI, guys. Quick question...I'm not certain what suspension the PO put on my '88 GW chassis. Has 3 blocks in the rear and a 7-leaf pack in the front,...
Last post
Thanks, Stuka. Here are the best photos I have. The first one kinda shows the suspension from the front (BTW this is after I moved the engine and...
Way back in the day, on my 1986 Grand Wagoneer, the power steering gearbox leaked like Niagara Falls around the pitman arm.
It was a lifted rig and I...
Last post
That’s the reason for maybe yes maybe no. I’ve built a lot of steering boxes and mixed and matched a lot of valving, changed ratios and refit the...
Has anyone used the fat bobs garage add a leaf kit? I’ve used their stuff I’m the past with an XJ and thought it was ok. I want to do a budget lift...
Last post
Thanks for the input everyone, I’m honestly just looking more for the proportions/balanced look of tire and clearance. I dig the low CG/big tire for...
Ok, so right now I have the 1406 on it, all dialed in, with a non-open adapter (it's has the spread bore on the bottom and square on top vs. being a...
Last post
I have the Buick 350, not a 360 AMC, so I'm just using the factory jets/rods/springs setup (the Skylarks could have a factory 4-barrel) because I...
Hey all! I’m going a while since I’ve had an update but figured now is a good a time as any. After my most recent visit to the Jeep that was filled...
Last post
I'm not sure I understand the issues with the Dana 20--it's plenty strong, and gear driven, and it's fairly light. But if you have a Quadratrac, and...
I’m seriously considering bagging the electric tailgate window for a manual crank on my 82 Cherokee. I’ve read mixed reviews on the Crown aftermarket...
Last post
I was fortunate to find a good OEM manual unit locally and did the switch. Has worked great since.
1977 Jeep J20, 360 V8, 4 speed. I ordered a 4 Skyjacker lift kit directly from Skyjacker, just after Thanksgiving. It was delivered late last week,...
Last post
Skyjacker sent me the correct U-bolt that was missing from the kit. So, I feel good that they are reputable to work with. Also, the springs say 'Made...
Anyone built this specific AMC 401 or 360 to 700r4 to Quadra Track drive yet? Front CV driveshaft Clearance on pan? Changing to regular 1310 U Joint...
Last post
To OldFarmTruck, if you want to keep your transfer case full-time, you need to have both the front and rear driveshafts. If you remove the front...
Has anyone heard or seen changing the tailgate to side hinges so it would open like a door instead of folding down? It would make accessing the cargo...
Last post
1975 Buick Estate Wagon with the Magic Tailgate, i was at a friends 4 months ago and he showed me this thing, opens both down and sideways, some...
Just checking to see if anyone is using the Canton AMC oil pan on their FJS? I have an '86 that I'm swapping in a 401 (after I build the...
Last post
So it looks like the later pan narrows in width at the arrow labeled “A” to the back of the pan, and I’m guessing the clearance marked “B” is for the...
Like many others I'm giving up on my coffin tank in favor of one that mounts under the rear and can actually be filled up all the way without burping...
Last post
Yeah I kinda figured that was the case, I just figured I’d post it in case it’d help you or anyone else in the future looking to do a tank swap...
I've went through about 10 youtube videos and countless threads on more complex set ups of a relayed door window. I know this should be super simple...
Last post
Glad you got it working. I couldn't remember his name but now have Serehill . He passed a few years ago but was making a reported very nice kit for...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
