Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So im thinking about setting up an electric fuel pump in my 1989 jeep grand wagoneer. Im curious as to if their would be some electric guru here who...
Building a new motor for the J10, 401 9 to 1ish compression, Edelbrock performer cam and Intake. Unhooking virtually all the emissions. Will probably...
Okay so I am in the process of building a 401 to replace the 360 in my 1886 j10 with a 727 trans. Is it as simple as bolting on a 74 matador 401 flex...
Last post
Cool you never know :P
I really like your truck it will be awesome with the 401
has any one swaped from a passenger side drop front axle to a driver side drop axle? i got a good deal on a set of axles from a 84 gw and im doing a...
Last post
did your 78 have the offset rear axle and if so do you have any problems with drive shaft vibration?
Alright. I've been searching this since the day I picked my truck up. Its a 67 j2000 and it currently has an AMC 327 and what I believe to be a T18....
Last post
When someone bolted a 401 to the T10 in my Marlin they had to custom fab a spacer between the bell housing and the trans, along with a spacer behind...
I have access to a rear end from a 04 Chevy Tahoe with disc brakes. I was wondering if I could make the disc brakes work on my 77 chief d44 rear end....
Last post
IMHO, you would be better off selling that axle and putting the money into a disc conversion kit. There are a couple of places offering them. ;)
My '78 Honcho had the original AMP meter, glass fuses, wiring, etc. Well I've had the yellow/red ammeter wires tied together via a 30 amp fuse for...
Last post
The next thing I would do is buy a couple of those trailer wiring isolators that turn 2 into 1 and use them under the dash. Your one brake light wire...
I have a set of 15x8 rims that have 3.75 of back spacing. I also have a set of 35x12.50r15 bfg all terrains. With these tires and the backspacing of...
Last post
I don't know. The lugs are one inch long. You would need shorter studs for anything less than one inch spacer.
So I'm trying to identify which prong is which.
I need the dash lights for both blinkers, speedo & fuel guage. I also need prong for the fuel sender...
Last post
Thanks math man! That's the way my buddy's 71 gmc is. As soon as I read that I remembered that about his. Not to show my age but is that the way it...
So I know theres a handful of places that make floor panels for the j trucks, but how big are they? Ive got quite a bit of rust in my floors and I...
Last post
The classic 2 current floor pans fit very well in our j2000. The tranny hump will likely need to be cut out past the replacement pans foot print. on...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum