Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Since Roscoe is now getting a Hemi transplant, I'm starting to gather the other stuff needed, figure the hydroboost is a good place to start. Heading...
Last post
boneyard brake boost parts, i think my life is worth a bit more than taking a chance on an unknown with my life but hey thats my opinion
So it's looking like I'm gonna be putting the slots on here pretty soon. I know a lot of people really like the stock, can-like center caps. I don't...
Last post
Don’t know if you ever found a set of short caps for the five slots but I have a nice set. I’m interested in selling.
Hi All, I've been building my 76 Cherokee and working through the last remaining issues with my new harness based on the '79 wiring diagram. I'd...
Last post
I ran into this same issue building my 77 Cherokee. I removed the older 3 pin wiper motor, cut off its mounting perch on the firewall. Got me a Wiper...
After years of searching finally found a replacement 89 Grand Wagoneer to replace my grandfather‘s that I grew up in looking into modernize it a lot...
Last post
Here’s everything you need.
Part of how I do them at the pace I do is by buying as many of the brackets as possible. I can’t pay myself to make...
Is there a bellhousing out there that will bolt onto the T176 to allow the use of a stock Jeep 4.0 CPS?
I'm aware of the crank mounted kits....
Last post
I would assume so. AFAIK the 4.0L and 258 flywheels only differ in the addition of the tone ring. Transmission won't care. Starter might be an issue,...
New to me J10, but it has an aftermarket radio that doesn't work. I'm still waiting on my TSM to be delivered (on order). In the meantime, is the way...
After years of searching finally found a replacement 89 Grand Wagoneer to replace my grandfather‘s that I grew up in looking into modernize it a lot...
I was advised in a previous question about upgrading my alternator that the ammeter bypass is a prudent mod. I search these pages and found some very...
Last post
The link is in this thread.
To use that meter, you need to drill new holes in the circuit board. There's no meter available with the correct...
I'm about to start rebuilding my J10 doors and I have question or two. I found this guy on you tube who's gone through the entire process IN DETAIL...
Last post
Thanks for the input. I've got the stock belts but the females both have cracked buckles. That's why the search. I'll research and consider new. I've...
hi, im searching for a pair of Brackets to mount Foglights on Front Bumper of my 82 Wagoneer.
Any Ideas ? Im located in Germany.
thanks Michael :fsj:
Last post
That user was a scammer. They have been deleted. I also edited the two quotes to remove that email address. Should you ever see these, hit the report...
I've been having a shift issues with my TH400 transmission since I bought this '68 J-3500. Today I finally had time to look into it. Figured I either...
Last post
You can use a straight version.
Summitracing , $22. SUM-G110
Good for th350 and th400
Ok here’s a bit of an odd one. So I was scrolling on facebook the other day and on an m715 group I saw someone asking about putting 3rd gen ram 2500...
Last post
The brackets should work, just don’t know if the factory control arms do. You may need to use something like a Johnny Joint to make up for...
Has anyone retrofitted a combination brake light and cargo light like modern trucks have to where the cargo light mounts? If so what's worked and not...
The original flanged axle d44 in my ‘70 Wagoneer has a lot of play in it. Shifting into drive causes a loud “clunk” and with the drive shaft...
Last post
Ok, so as this area is outboard of the axle tube seal, you will NOT want to seal that area off. Sounds more like it is designed to be open to air, so...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
