Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Long story short someone on the facebook group full size FSJ enthusiasts sent me a link here about modifying the gauge panel to bypass the pulser in...
Last post
Whenever I am working on customers clusters and I upgrade the CVR for them I basically do what Tim is saying above. I use a 7805 voltage regulator...
I recently acquired a '77 cherokee and when I checked the oil it looked about a quart high. I figured someone put in too much and changed the oil....
Last post
Wow.....never thought oil would foam with that low rpm's, and only if it was low level drawing air in with it. Figured oil would maintain consistency...
Hello. Does anyone have any pictures of the parking brake cable configuration? I don't have any pics and I need to put mine all back together on the...
Last post
Good pictures in the parts book generally. '74-80 book not expensive on media or paper from RockAuto. You should own it.
I've done general internet/forum searching and not come up with any FSJ specific references. But has anyone had experience replacing the metal hinges...
Last post
Thanks Yeller! I did not know about that vendor. Much appreciated.
Hey everyone. I'm rebuilding my knuckle the knuckles on the Dana 44 in conjunction with installing disc brakes. Taking the knuckle off, it looks like...
Last post
Maybe Amazon instead? Look the TREs up on RockAuto and look for the same on Amazon. They will take stuff back with ordered by mistake and credit back...
I have an ammeter bypass on my agenda for the 84 j10. A few questions, they maybe be simple but I am not an expert.
1)If I attach both wires to one...
Last post
Just moved the alternator output to the starter solenoid lug with a fusible link. Easy enough, just excavated enough wire from the harness. Couldn't...
Just finished doing the rear shocks. Everything came off great. Went to the front, soaked the nuts/threads with PB Blaster. Passenger nuts came off...
Last post
Interesting about the welding issue. I didn't end up welding the bolt head to the bracket. As I looked at it, the bottom of the shocks are just nuts...
I apologize in advance for:
1. This being my first post ever to such a forum so will be sloppy and incomplete.
2. This probably being covered...
Last post
Thanks, much for the info on the fuel filter. I will hopefully get to work on it on Saturday and will get the fuel system closer to spec with the new...
Just curious if there is any way to adjust a manual window regulator on a 1976 j10? Drivers side window easily pulls/falls down and won’t stay rolled...
Last post
The window probably broke free from the mechanism like mine. Are yours manual?
Sent from my Pixel 7 Pro using Tapatalk
Yes, it’s a manual...
Hello everyone. I have a 1990 Grand Wagoneer, stock but with fuel injection. I had a weird occurrence yesterday and wanted to know if people had any...
Last post
Ok so I pulled the transmission pan over the weekend. The oil was fairly clean as I had changed it this year, the pan did have a bunch of glitter in...
The TSM is a bit obscure, but I suspect that removing the inside manual handle could be the ticket... I am not planning on removing the gearing...
Last post
Thank you , for sure lubrication of the pin is a good idea... but in my case the channel was replaced 10 years ago... when someone broke the tailgate...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum