Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Im having some real problems with my '89 GW stock engine harness. Many lines are damaged, burned and frayed. Does anyone know of anyone who makes a...
Last post
If you don't know what you're doing & don't have the skills & tools to rewire the old harness the complete replacement is far more prudent. Not a lot...
Are there any tricks to getting these two out? The AC box is in the way and I would rather not remove if I can help it. In the photo, I have a swivel...
Last post
lol good luck!
I'm able to remove all 8 spark plugs from my AMC 360 without even opening the hood. Super, super easy. It's because I have no inner...
Ok so I have posted here several times about transfer cases.. IM curious as to your guys opinion on just replacing the slipping chain on my np229 tc....
Last post
The reason the NP208 is an upgrade is because the chain only drives the front axle. I posted a site link recently that talked about the chains, etc...
I have always tended toward using Fel-Pro . . . but if anyone knows of a better-quality exhaust manifold gasket which is correct for an '88 GW with...
Last post
I'm totally sold on Remflex now. I had bolts repeatedly loosening and leaking on the passenger side until I put on a Remflex a couple years ago. All...
Hey all,
I got my 74 Cherokee up and running finally, purr's like a kitten! Now it's time to get the AC back up and running. It has the underdash AC...
Last post
Sorry it's taken so long, but here are the pictures of the 74 AC switch. Any help on wiring the AC is greatly appreciated! 006.JPG 005.JPG 004.JPG
I bought new outer window wipes for the 4 cabin doors as they are shot. I also got this magical tool from Lisle that is supposed to easily remove the...
Last post
So far so good, but I'll keep an eye on what you mention. Note I said slightly bent them out as even with palm force I could not get them to seat...
Morning all!
I have been chasing this issue for awhile and could use a bit of advice. I am not getting any oil up the front passenger side pushrods....
Last post
I rap the rockers (down on top where the pushrod is) while the motor is running to see if the clog pops loose. I used to have a 3 fingered lifter...
Has anyone rebuilt and how hard is it to do this? I just found out that the shaft I had bought years ago from a member intending to use in the future...
Last post
I am confused. You cleaned and lubed it and got another 1/2 out of it? ;)
That's what I told her.... 8-)
I have an 88 Wagon with original R-12 air that blows coldish but have bubbles in sight glass. Anyone evacuate and recharge with the Red Tek stuff?...
Last post
Some bubbles in a R-12 system were normal and not a big deal if the a/c is cold,134a systems have bubbles all the time esp CCOT (one reason why most...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum