Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I blew the rear brake line just before the T-Junction to the wheels. I replaced the hose and then realized that the steel line was also leaking....
Last post
There should be a rubber line from the front axle to a vent cap. Usually that's clamped to a radiator bolt. Don't know about the transfer case vent....
I lost the use of my clutch pedal on my '79 J10 on my way home from work last night, with buckets of rain coming down while picking up...
Last post
Years ago the rod between the clutch fork and bellcrank fell off my J10 in deep snow in the dark. I fitted two 3/8” drive extensions from my tool box...
I'm finalizing my 1 Ton steering upgrade. I've been running the prototype on my J20 and WideTrac Cherokee for a while now to work out the bugs....
Last post
I bought one from you for my WT, it's getting powder coated right now, it's well made and the pvc tube worked great for shipping! Glad your dong this...
Does anyone know if there is a kit for eliminating my sunroof in my 1986 Grand Wagoneer? Its constantly causing problems, and the cons...
Last post
I do like the idea of a softtop / canvas sunroof sort of thing. My main concern right now is stopping all the leaks. I know these things always kind...
I have a 71 Wagoneer 360 that currently has the Eaton power steering pump. I would like to upgrade to the Saginaw that almost every Wagoneer came...
Last post
I parted a 72 last year with a Saginaw pump (AMC 360). Jeep both under Kaiser and the early AMC years tended to have more than one supplier for some...
What inline six would be factory correct? oljeep VIN decoder shows 258, Google search shows 258 in later Jeeps.
Would it be the AMC 232 as indicated...
Last post
I would definitely recommend the B350/Turbo 400 if you're towing. It's a good solid setup anyway, but it has all kinds of low-end torque, especially...
Its in good shaoe exceot the top 1.4 section. The section thst sat directly on the rusted out bed. Which in turn rusted...
Last post
Gas tank coating tend to fail after a while, sending goo inside the fuel delivery system, a very common issue when used in motorcycle gas tanks... a...
Trying to ID proper lugs for my slotted Alum rims I recently acquired.
Size I believe is 7/16 x 20 thread conical 60.
Not certain if they require the...
Last post
6-lug wheels are 7/16 - 20 IIRC. 5-lug is 1/2 . Yes, RH thread all around. Kinda think they are conical seat and no washer, but don't hold me to that.
Sorry if i seem ignorant. But im trying to get this 360 running properly on my J10. It start immediatly but dies immediatly. Gas tank oddly eveb...
Last post
candymancan,
I can help you out here. The steel lines at the firewall are for your Quadratrac transfer case vacuum shift pod mounted to the transfer...
The early door panels (mine is 1965) seem to have all rotted away and are not being reproduced. I have found a few photos but have never put my hands...
Last post
ABS is a good suggestion. Foam board would work too, and should be ok if you are going to cover it up.
Well, started driving around the Wag this summer. I put in a Sniper and it is still going through the final learning phases. I drove around my...
Last post
Make sure that your alternator belts are tight and not slipping. Also, in my case the volt meter lies and shows a volt lower than it is. My AC on max...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
