Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
My ammeter is holding around +30 while driving. It only occasionally drops back around 0 or slightly negative. It's a new battery, and I suspect the...
Last post
Ah. I have an amps clamp. Never heard it called a current gun. Mine is not fancy - seems ok.
Yes, the alternator charges the battery to replenish...
I just had a local shop rebuild my 401 heads. This is the first time I have ever done the heads independent of a complete engine rebuild. The 401 has...
Last post
i've heard more issues with people have with warped heads and block when the venture into LS territory, having aluminum blocks, Siamesed cylinders,...
Long story short someone on the facebook group full size FSJ enthusiasts sent me a link here about modifying the gauge panel to bypass the pulser in...
Last post
I read on a few electric forum boards NTE was just a rebranded name. They buy big name parts and put their name on it then mark up the price. Didn't...
Hello everyone. I have a 1990 Grand Wagoneer, stock but with fuel injection. I had a weird occurrence yesterday and wanted to know if people had any...
Last post
I'll have to check my receipt. They added a valve to allow it to pump oil when in park. So it seems like its one part of that kit.
So i changed my oil and i nkticed silvery powder in it. Dropped the pan.. and sure enough there are tons of metal chunks in the pan . Non magnetic.....
Last post
steel and rust, bare steel and moisture are needed to form rust. the filler tube is also the breather tube without warming up the engine to full...
I’m hoping to get some help on what I thought was a simple job…
I am redoing the fuel lines on my 1977 Jeep Wagoneer. Previous...
Last post
Aluminum might be ok, but knowing nothing else, it would not be my choice. Both aluminum and copper accumulate stress no matter how small. Eventually...
I apologize in advance for:
1. This being my first post ever to such a forum so will be sloppy and incomplete.
2. This probably being covered...
Last post
Thanks, folks. I have the TSM so will start trying to learn more about the carb. I got the new HEI wired into the ignition switch and it seems to be...
The timing chain replacement is finished and I've had no leaks until I drove it on the highway. There's a little oil on top of the timing cover which...
Last post
I am replacing my timing cover. I wonder if I should do this as a 'preventative' measure while the cover is off and it is easier to get to.
So on my 76 when i did its first oil change 1 year ago all they had was a small STP filter.. its not as wide as the one on my 90,. same length but...
Last post
oil filters , shouldnt be picked by recomendation but by personnel research into the filtration a. the type of medium b. filtration level in microns...
I recently acquired a '77 cherokee and when I checked the oil it looked about a quart high. I figured someone put in too much and changed the oil....
Last post
Wow.....never thought oil would foam with that low rpm's, and only if it was low level drawing air in with it. Figured oil would maintain consistency...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
