So finding factory roll bars mainly on honchos is going to be impossible.
There is a 81 cj5 in the jy here. And they sell roll bars for 33$. But being 81 is the larger roll bar that tilts back to line up with the windshield tilt. And it bolts to thr floor board. Versus the older models that are on a bar and bolt to the back of the tub.
But anything can be modified. What do you think about modifying this ? Shorten it so its just high enough to reach cabin roof height for lights.
Then cut the back / slanted bar off.. so i cant tilt the main bar up straight. Then mark and cut the / slanted bar and reweld to the now straight one.
Then cut the center and widen it so it will mount to the bed walls. Weld a plate on the bottom of each leg so i can bolt it to the bed.
I dont want it to protect me from rolling over lol. I just want it for looks and a light bar. The J10/20s look much better with a roll bar.
The green jeep if you can read my writing is to show you what my idea was.
The blue one is the one in the jy.. also does anyone know what kind of bolts do these use ? So i bring the right tools. Are like star bits or regular hex head bolts ?