Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Can someone please idiot check me here....the front hub cupped spring washer should be oriented as show in the picture yes? I believe this idiot (myself) installed them backwards last time I did the brakes. One was destroyed when I took apart again....the other was in good shape.
Manual says install with Cupped side towards center of vehicle....which tells me I was probably wrong last time
1976 Cherokee Chief w/ stock qtrack.
Joe
You do not have the required permissions to view the files attached to this post.
Thanks Stuka...I also found a yukon locking hub kit kit that uses that same cupped washer, and the orientation is also as discussed. So i'm good there. Stupid me thought it Cupped the spring as opposed to cupping the bearing race to keep the spring positioned out.
CBJoe wrote: ↑Tue Nov 21, 2023 8:26 am
Thanks Stuka...I also found a yukon locking hub kit kit that uses that same cupped washer, and the orientation is also as discussed. So i'm good there. Stupid me thought it Cupped the spring as opposed to cupping the bearing race to keep the spring positioned out.
Easy mistake to make, as logically the other way kind of makes sense too.
