bed liner in cargo area
-
Yeller
- Posts: 1548
- Joined: Thu Apr 01, 2021 7:54 am
- Location: Rogers County Oklahoma
Re: bed liner in cargo area
I doubt Devildog has a lot of issues with moisture lol. Gets 13” of rain per year in 4 down pours 
The bus I ride is so short it is a yellow Smart Car full of squirrels, monkeys and clowns.
1970 J2500 Resto Mod
https://www.fsjnetwork.com/forum/viewt ... 12&t=21395
1974 Bronco “Broncno”
https://classicbroncos.com/forums/threa ... st-3411909
1970 J2500 Resto Mod
https://www.fsjnetwork.com/forum/viewt ... 12&t=21395
1974 Bronco “Broncno”
https://classicbroncos.com/forums/threa ... st-3411909
-
why_rick
Topic author - Posts: 44
- Joined: Thu Jan 12, 2023 2:15 pm
- Location: San Diego, CA
Re: bed liner in cargo area
And I probably get less than that!
Chop your own wood and it'll warm you twice
77 Cherokee Chief Wide Track Levi Edition, stock 360 (for now)
65 Chevy C10, 350, 700R4
77 Cherokee Chief Wide Track Levi Edition, stock 360 (for now)
65 Chevy C10, 350, 700R4
-
devildog80
- Posts: 1124
- Joined: Wed Apr 13, 2022 2:41 pm
- Location: Apache Junction AZ
Re: bed liner in cargo area
True statement.
When I pulled the carpet out of the whole truck, the metal/paint under it looked like it just rolled off the assembly line, but carpet was absolutely falling apart. You could tear it like a single sheet of paper.
I did leave the leveling boards under the mat, so there is air gap there to allow any moisture to dry, and not trap directly against the metal and mat......what little we do get here. And no plans to do any fording of streams that deep, to have water flowing through the cab.
When I pulled the carpet out of the whole truck, the metal/paint under it looked like it just rolled off the assembly line, but carpet was absolutely falling apart. You could tear it like a single sheet of paper.
I did leave the leveling boards under the mat, so there is air gap there to allow any moisture to dry, and not trap directly against the metal and mat......what little we do get here. And no plans to do any fording of streams that deep, to have water flowing through the cab.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), Edelbrock clone 1406, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
'84 Grand Wagoneer, 401 V8 (.030 over), Edelbrock clone 1406, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
-
why_rick
Topic author - Posts: 44
- Joined: Thu Jan 12, 2023 2:15 pm
- Location: San Diego, CA
Re: bed liner in cargo area
Ended up doing Monstaliner. I like it. Was easy to put on after I took my time doing prep work.
You do not have the required permissions to view the files attached to this post.
Chop your own wood and it'll warm you twice
77 Cherokee Chief Wide Track Levi Edition, stock 360 (for now)
65 Chevy C10, 350, 700R4
77 Cherokee Chief Wide Track Levi Edition, stock 360 (for now)
65 Chevy C10, 350, 700R4
-
jpcoutts
- Posts: 50
- Joined: Sat Sep 03, 2011 7:30 pm
- Location: Hot Springs, AR
Re: bed liner in cargo area
That looks pretty good! I hope it lasts.