Sniper Linkage issue
Posted: Mon Jul 13, 2020 10:42 am
Installing Holley sniper on my ‘89 GW w/mopar stroker motor Than was running a Holley tbi/Howell system . Bought off eBay from Holley ( refurb) yesterday but ran into two problems . 1. Inability to hook up fuel lines to the back (3/8’s and 5/16’s hose fittings ) b/c they appear to be 5/8’s male fittings.... And calling around Colorado Springs ...I cant find anyone that makes that adapter or has it in stock. . I tried NAPA auto parts, O’Reilys, several hardware stores too . Employees as Napa encouraged me to try a Whisler Bearing company Here and I called them and they don’t know....gotta drive down there with the ANI fitting that was on the Holley unit as a test piece.
2. My mechanic buddy who is helping me a lot with this marveled as well that there doesn’t seem a way to hook up the throttle & cruise control cables As they would bind if they could be made to con next with the given bracket on the Sniper. How are you guys connecting these??
I’ve been reading the past posts concerning Sniper Installs and I haven really found, to my great amazement, talk of running to Either of these problem by other installers . What gives? Anyone have some helpful advice on this? I’d appreciate it.
Holley must be having problems b/c every time I call I get a recording saying there are more calls than they can handle....”please try again later’.
Frustrated and I haven’t even gotten to ‘deal’ with any of the tuning issues/parameters yet.
2. My mechanic buddy who is helping me a lot with this marveled as well that there doesn’t seem a way to hook up the throttle & cruise control cables As they would bind if they could be made to con next with the given bracket on the Sniper. How are you guys connecting these??
I’ve been reading the past posts concerning Sniper Installs and I haven really found, to my great amazement, talk of running to Either of these problem by other installers . What gives? Anyone have some helpful advice on this? I’d appreciate it.
Holley must be having problems b/c every time I call I get a recording saying there are more calls than they can handle....”please try again later’.
Frustrated and I haven’t even gotten to ‘deal’ with any of the tuning issues/parameters yet.