Page 1 of 1
Th400 dipstick tube hold down method
Posted: Sat Feb 16, 2019 4:25 pm
by mjdriver
My j2000 is missing the hold down for the dipstick tube, if anyone has a pic of how its held down and where from would be great. I can see if i could make something up.
Sent from my VS986 using Tapatalk
Re: Th400 dipstick tube hold down method
Posted: Mon Feb 25, 2019 8:34 am
by letank
tough to take a pict, it is a bit oily, I was crawling doing some leak survey, and could not see it. The clamp is below the passenger cylinder head and above the trans hump.
Looking in the parts catalog, the clamp is part of the dipstick tube J536 1276 for the V8 and TF 727, I suspect that the the TH400 has the same layout
check ebay item, it is supposed to fit TH400...
351669624078
EDIT: found a spare for a TH350 and the clamp is a rolled piece of metal that snaps onto the dipstick tube, check "spectre 5472" the pictures are not clear but you get the idea
Re: Th400 dipstick tube hold down method
Posted: Sat Mar 02, 2019 2:02 pm
by letank
BTT
looking at baldxxxx post , albeit it is on a TF727, the clamp is attached on the trany hump
Re: Th400 dipstick tube hold down method
Posted: Sat Mar 02, 2019 5:53 pm
by BaldBeardedBastard
I didn't realize I was censor-worthy!
Sent from my Pixel 2 XL using Tapatalk
