Page 1 of 1
AMC 360 V8 to TF727 bellhousing measurements?
Posted: Sat Oct 06, 2018 3:26 pm
by WoolyBugger73
Does anyone have a schematic of the bellhousing bolt/pin/shaft measurements for an AMC 360 V8 coupled with a TF727 transmission? If it is in another post and I missed it in my searches, I apologize in advance. Thanks.
Re: AMC 360 V8 to TF727 bellhousing measurements?
Posted: Sat Oct 06, 2018 6:09 pm
by Cecil14
All the Gen3+ motors (232/258/4.0L/304/360/401) share the same bellhousing pattern. I know that doesn't really help, but if you can find the pattern from any of those motors, it'll be the same.
aa
Re: AMC 360 V8 to TF727 bellhousing measurements?
Posted: Sat Oct 06, 2018 9:08 pm
by will e
Welcome to the Forum! The info might be out on some of the other AMC type sites as well. You probably know that the pattern is unique to AMC. If you can share why you are asking we might be able to provide additional help.