Page 1 of 1
Derf's "I ain't taking it home" sale
Posted: Wed May 30, 2018 1:21 pm
by derf
So I have a bunch of parts that I want to get rid of. I will be bringing them with me. I want to get rid of them. They will either go home with you or end up in the dumpster at the KOA.
It's hard for me to put a price on most things. Much of the little stuff will be "free-ninety-free", as in "please take it".
I'll go through the boxes over the next couple of days and come up with a better list, along with more pictures.
Highlights:
Timing cover off a 1978 401. In good shape as far as I can tell. Comes with intact oil pump/oil filter adapter. I'll take $20 for it.
Cap/Rotor/Plugs/coil for a TFI upgrade. Used for maybe 5K miles before I screwed up the engine and swapped in the 401 with the MSD distributor. The distributor has been manually converted to lock out all advance (for my TBI controlled timing). $10
See the full writeup at
http://www.grimmjeeper.com/TruckNorris/tfi.html
Things for free-ninety-free:
Cover plate that bolt between a TH400 and the engine block (not the removable access cover). I might have two. I know I have at least one.
Oil fill tube with 710 cap.
Pulleys: At least one water pump and one crank, both off either a 78 401 or an 86 360. I think they are the same. Both 3 groove.
Misc. bolts. timing cover/water pump, oil pan, intake manifold, J20 wheel studs, etc.
I know I have more. I'll add more as I get a chance to look through it.
Re: Derf's "I ain't taking it home" sale
Posted: Wed May 30, 2018 1:58 pm
by fulsizjeep
I would like to get the TC cover.
Sent from my XT1032 using Tapatalk
Re: Derf's "I ain't taking it home" sale
Posted: Wed May 30, 2018 2:40 pm
by derf
It's all yours.
Re: Derf's "I ain't taking it home" sale
Posted: Wed May 30, 2018 10:00 pm
by will e
Last year I brought a bunch of stuff with a 'no offer too low' attitude. Got rid of a bunch of stuff I didn't need (360 TF727 flex plate for example) and made some folks happy. And I have less stuff to store. It was a win win.
Are we going to have a swap meet day/time this year? I think we should! Jerry has to pay for his trip somehow!
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 4:21 am
by fulsizjeep
derf wrote:It's all yours.
Gracias
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 7:26 am
by derf
will e wrote:Last year I brought a bunch of stuff with a 'no offer too low' attitude. Got rid of a bunch of stuff I didn't need (360 TF727 flex plate for example) and made some folks happy. And I have less stuff to store. It was a win win.
Are we going to have a swap meet day/time this year? I think we should! Jerry has to pay for his trip somehow!
Maybe have a table at a neighboring site to the BBQ?
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 7:28 am
by derf
I remembered a couple more things.
I have some front turn signal housings and lenses, as well as maybe an extra tail light lens or two.
I also have a few ignition coil brackets.
All will be free to a good home.
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 9:41 am
by jsinajeep
will e wrote:Last year I brought a bunch of stuff with a 'no offer too low' attitude. Got rid of a bunch of stuff I didn't need (360 TF727 flex plate for example) and made some folks happy. And I have less stuff to store. It was a win win.
Are we going to have a swap meet day/time this year? I think we should! Jerry has to pay for his trip somehow!
Sure that sound RIGHT, Thanks
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 9:44 am
by jsinajeep
Heck, I will give you $10.00 just for the red wires on the dist cap
Re: Derf's "I ain't taking it home" sale
Posted: Thu May 31, 2018 11:13 am
by will e
When did we do it last year? It was Friday morning I think?
Re: Derf's "I ain't taking it home" sale
Posted: Sat Jun 02, 2018 8:25 am
by toothofwar
derf wrote:I remembered a couple more things.
I have some front turn signal housings and lenses, as well as maybe an extra tail light lens or two.
I also have a few ignition coil brackets.
All will be free to a good home.
I sure would be interested in the turn signal housings and lenses. Unfortunately I won't be able to attend, but maybe we can work out some shipping?
Sent from my SAMSUNG-SM-G891A using Tapatalk
Re: Derf's "I ain't taking it home" sale
Posted: Thu Jul 05, 2018 9:57 am
by Hatchet Jack
I will be more than happy to rifle thru the aforementioned boxes
Re: Derf's "I ain't taking it home" sale
Posted: Fri Jul 06, 2018 6:26 am
by Knucklehead
Last time we went to one of Derf's sales, my son ended up with a black Wagoneer.
Re: Derf's "I ain't taking it home" sale
Posted: Sun Jul 08, 2018 1:57 pm
by 78 Arizona Chief
Just checking in to see if anyone is in need of a set of Cherokee rear wide-track dana 44 axle shafts? They are off-set for the quadratrac. I got two sets so I can let one go. Don't wanna toss them in if not needed.
Kevin
Re: Derf's "I ain't taking it home" sale
Posted: Mon Jul 09, 2018 8:34 am
by Nikkormat
I'm parting out an 81 Cherokee and an 89 Grand Wagoneer plus have a big inventory of parts. Let me know what you need folks!
Re: Derf's "I ain't taking it home" sale
Posted: Tue Jul 10, 2018 8:47 pm
by 78 Arizona Chief
Anyone parting out a J-truck? I am looking for a J-10 or J-20 tailgate. Let me know if anyone has one and can bring it to Ouray. Thanks!
Kevin
Re: Derf's "I ain't taking it home" sale
Posted: Wed Jul 11, 2018 7:42 am
by toothofwar
Nikkormat wrote:I'm parting out an 81 Cherokee and an 89 Grand Wagoneer plus have a big inventory of parts. Let me know what you need folks!
I probably already know the answer to this, but any wide track fender flares that's somewhat rust free? I know that's asking for a unicorn, but hey, it's worth a shot.
Sent from my SAMSUNG-SM-G891A using Tapatalk