Full Size Jeep Network

One advantage to being all together in one place is that we can swap parts without having to deal with all of the shipping costs. I think it would be a good idea for everyone who has something or wants to buy something could post up in one thread.

I have a stack of parts I'm not using any more that I'll be able to bring. I'll have to add some pictures later but off the top of my head:

• Pair of burgundy seats from an 80's Grand Wagoneer in pretty good shape. The drivers seat has some wear but there are no tears or anything like that. $50 - Reserved
• Sanden AC compressor bracket with bolts for the compressor (but not to bolt it to the block). $25
• 80's V8 alternator brackets with bolts and spacers. $25
• New aftermarket alternator to fit an 80's V8. $25 - Reserved
• An assortment of V8 timing cover/water pump bolts. $free
• Edelbrock Chromed steel valve covers for AMC V8s. $25
• Thermostat housing for AMC V8s, complete with 3 port CTO vacuum switch. $free
• I'm sure I have some misc. fasteners for the engine as well. $free

I'll have to dig through my parts bins to see if I have any more parts. And I'll post some pictures as well.

Edit: Parts that have sold have been removed. Parts spoken for have been marked reserved, pending sale.

I still haven't gotten to the pictures. I'll see if I can do that before I leave for Ouray.

Hey derf, you got a pic or link to the bulltear valve covers? I may be interested.


Sent from my iPhone using Tapatalk

tedlovesjeeps71 wrote:Hey derf, you got a pic or link to the bulltear valve covers? I may be interested.


Sent from my iPhone using Tapatalk

They discontinued them but reissued them. Here's the link to the reissued ones: http://www.bulltear.com/catalog/product ... 95e587fa86



The ones I have are powder coated black with the raised part on the top machined smooth.

They look like this:

Put me down for those sir, I'll take em!! I can send you the money if you like. That way, if I don't make Ouray, we can figure something out. I'm still hopeful I can make it.
Those will look sweet on my Scramblers 360.


Sent from my iPhone using Tapatalk

tedlovesjeeps71 wrote:Put me down for those sir, I'll take em!! I can send you the money if you like. That way, if I don't make Ouray, we can figure something out. I'm still hopeful I can make it.
Those will look sweet on my Scramblers 360.


Sent from my iPhone using Tapatalk

You could just drop by this weekend. I'm in CO Springs.

Cool! It may have to wait for next weekend since I think HH6 has this weekend full up.


Sent from my iPhone using Tapatalk

Awesome. I'm guessing it's one of those dirt lots on Google maps? Haha.
Let me see what the wife has planned and we can arrange me coming for them. Thanks man!

Btw, Tapatalk is being a real PITA. Won't let me reply to your pm.


Sent from my iPhone using Tapatalk

There's actually a couple of buildings built in the google map. And they have the foundation of the building I'm in showing in the picture.

Make me an offer, I am anxious to get most of this gone. Some of it I am posting local too so it may be gone.
Things with an astrick I am going to bring to Ouray with me either way. set up a table near jerry.
What day do you all want to do the parts swap? How about wednesday? Or Thursday before/during/after the pot luck?

Used spare shafts for wide track. Came out of an 82 so D40 DD up front and amc 20 in the back.
New alloy wide track shafts for AMC 20

ADDED: Factory Trailer Hitch

Used d44 flat top knuckes from "Parts Mike" Good for doing a SOA

2 brand new in the bags AMC 20 rear bearing and seals from BJ's*

4 bolt 3 grove crank pully for amc v8 used
3 bolt 2 grove crank pully for amc v8 used

black ash tray with bracket ok shape*
Brown Ash tray, needs restoration, with bracket that has optional light*

Warn trailer hitch mount for winches. Used and scratched.
Warn roller fairlead. Used.

Used retangular headlights with buckets*

Two Used windoiw washer res. With motor. Dirty but in nice shape. No idea if the motor works.*

727 tf flex plate. Used but it is in very nice shape.*

Bumper guards - two - One is a bit beat up but the other is in decent shape*

5 almost new 8 lug aluminum rims. Cheap. One has some rash on it from a ratchet hold down. They may have a bit of scratches on them from a wheeling trip. I replaced these with some that had a tighter offset. No caps. Here is what they look like:

@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity!


Sent from my iPhone using Tapatalk

tedlovesjeeps71 wrote:@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity!


Sent from my iPhone using Tapatalk

Thanks for all the help.

How's your back?

derf wrote:

tedlovesjeeps71 wrote:@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity!


Sent from my iPhone using Tapatalk

Thanks for all the help.

How's your back?

You're very welcome!
Back isn't happy. Yesterday was a little rough but today seems better. As much as it can suck, I refuse to keep it from letting me have a little fun and be somewhat helpful!


Sent from my iPhone using Tapatalk

Hey guys, Wyatt is looking for two rear dog dish hub caps. They can be in rough shape they just need to snap on! He's a poor college kid, so he's willing to spend $20.

Like I said, they don't need to be nice. Just serviceable.

And Roy, I think I'll take an alternator off your hands!

Nikkormat wrote:And Roy, I think I'll take an alternator off your hands!

Hit me up when you get there and it's yours.

I am planning on bring some manuals and other parts.

I have the mirrors from my 88 wag and the taillights from a 78 Cherokee I could bring. I also still have a Smittybilt roll cage for a Cherokee. Not sure if I could fit that in though.

Sent from my SM-S920L using Tapatalk

I have a TON of stuff I need to clear out that I'm getting listed. I'm not going to Ouray this year but we could figure out a way to get it to you - either hitch a ride or drive by Golden on the way.
Prices are negotiable.

https://denver.craigslist.org/search/ss ... d=35689709

Looking to pick up some 70's era manual seat brackets if anyone has a set.

will e wrote:Make me an offer, I am anxious to get most of this gone. Some of it I am posting local too so it may be gone.
...
Used spare shafts for wide track. Came out of an 82 so D40 DD up front and amc 20 in the back.
New alloy wide track shafts for AMC 20

I might want those alloy shafts or possibly the stock ones). How much we talking?

Sent from my XT1096 using Tapatalk