Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
Stuka I got the faces from whitefaceguages.net they have a lot of stuff like the fluorescent needle paint. The gage set is a NOS metric set a friend of mine re calibrated. I added 8 LEDS & then changed the xisting light bulbs to LED. I like it thanks for the look. therer are no incadescent lights on the entire vehicle.
I know it's not fer everyone & that'sexactlyy the goal. My dad had some panels when I was a kidwith thee rattling barn doors & although they are nostalgicc they aren't my cup of tea. I actually looked at buying a panel & doing all this to it but I found it much easier to turn this into a panel.
The voltmeter is accurate to the tenth of a volt the most accurate way to watch your battery when running a 12K winch.
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
68J2000 wrote:Truck looks great! What seats are those and how are they for comfort??
The seats are fron Jegs. I love them down side a little tedious to get in but comfortable totally. Off road they help keep you in the seat they are great for that. They unlock to move forward & have a knob to lay all the way back to anywhere you want them to recline to, I did have to re drill the sliding mounts to fit adjustments. the mounts are the factory ones. They will work with out drilling but I wanted them to go farther forward to make getting into the back easier. I have the link somewhere if you want them for the seats PM me I'll dig it up. These are the best long road trip seats I have had in a rig like this. If you're over six foot tall you would probably have to shave the factory mounts. These sit High but for off roading & being able to see they work great for me.
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
66stepside wrote:Whoa. I don't think I ever saw any interior shots on your jeep until you posted it here- I just remember the avatar.
Man, nicely done!
Not fair But thanks I can't even look at your thread [About your panel] My mouth keeps flying open. You're rockin that panel Bud.
Thanks for the compliments I tried to resto retro mod & it worked pretty well.
Last edited by serehill on Mon Apr 08, 2013 11:12 pm, edited 1 time in total.
1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?