Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I'm planning my 76' J20 build and I was wondering how the people out there, who are running a sway bar and SOA, rigged up the links to the axles? Did you make a custom spring plate to attach the links? I look forward to hearing from you!
What I did was use the stock plates upside down on the top of the springs and swapped left for right. Had to weld up and redrill the holes because one u-bolt is bigger where it catches the edge of the diff housing.
Mines different in that neither spring sits on the diff housing but I think what I did would still work for you.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Yeah, I heard the earlier ones you can just swap and flip since they are basically flat on both sides. The later model ones this doesn't work because they are not flat.
A collection of 1966 to 1986 parts. Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks (Join date = Friday the 13th)