Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I'm installing these digital gauges, and while i can probably figure out where to put the "brain", if someone has already done it, id rather not have to use MY brain to do it.
Any thoughts appreciated!
I have a 79 Cherokee and mounted my brain behind the gauges, off to the left and on the firewall, but I'm not sure what kind of room you have behind yours. Sorry, I don't have a pic.
Jeff
Beast : 1979 Cherokee Chief
Engine : 2003 GMC 5.3 liter Vortec
Trans. : 2002 4L60e / Transfer Case : 1989 NP241C with Slip-yoke eliminator
Lift : 4" / Tires : 33/12.50./15 BFG KM2's
Dakota Digital dashboard cluster
I havent finished the install yet but I planned on putting mine right behind the gauges, there is plenty of room in mine since the stock gauages were deeper. I wasnt even going to mount it, just set it in there.
"After years of being paranoid about my Jeep’s temp going towards that 220F mark, I’m realizing that if it was real problem, Jeep engineers would have painted that area RED." - FSJ Guy
srobertsfsj wrote:I havent finished the install yet but I planned on putting mine right behind the gauges, there is plenty of room in mine since the stock gauages were deeper. I wasnt even going to mount it, just set it in there.
Yeah, Thats kind of what I ended up doing. I may eventually just get some sticky back Velcro and stick it to the back of the Gauges. But I need to have the button accessible for set up for now. . (Im not driving it yet. )