Flex what you got

Area for Offroad Modification Tech
Post Reply

dambram
Posts: 83
Joined: Wed Nov 20, 2013 1:18 pm
Location: Warwick, RI

Re: Flex what you got

Post by dambram »

Rusty's 4" Kit with 32" AT's. Tires tuck perfectly.

Image

Image
'89 Grand Wagoneer - 6" lift, 33's, 5.3L swap in progress
User avatar

XJChad
Posts: 315
Joined: Sat Sep 28, 2013 11:58 pm
Location: Dewey, Ok

Re: Flex what you got

Post by XJChad »

dambram, do you have any issues with the 32s rubbing with the Rustys 4"? I ordered a 4" from Rustys last week, just waiting for it to ship. I would like to run 32s or 33s but I know I will have to do some trimming with 33s. I also know some brands of tires are actually taller than other brands of the "same size".

Sent from my SCH-R970 using Tapatalk
1989 Grand Wagoneer, 4" Rusty's Lift, LS 5.3L swap (in progress), 4L60e, NP241c.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.
User avatar

jaber
Vendor
Posts: 3066
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Flex what you got

Post by jaber »

I dont know the brand or advertised size of my lift, (PO installed) but the only time my 32's rubbed was when I went through a dip at 35 and heard a rub, but never saw where. It would only do it at a bouncing full stuff. :-bd
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Flex what you got

Post by fulsizjeep »

32x11.5s fit a 4" lift well if you use a 15x8 wheel. I have run them on 3 different 4" lifts with no rub including Rustys brand pictured below.

Image
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Flex what you got

Post by TUDrewser »

I hate you guys. I was perfectly happy with my 31's until this latest discussion.
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Flex what you got

Post by jsinajeep »

TUDrewser wrote:I hate you guys. I was perfectly happy with my 31's until this latest discussion.
You can always give me your old "31" and go buy new "32" :D

surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: Flex what you got

Post by surfwagoneer »

Poser shot in my buddies baby jeep in Uwharrie this weekend

Image

My to do list grew substantially after a weekend on the trails
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress
User avatar

XJChad
Posts: 315
Joined: Sat Sep 28, 2013 11:58 pm
Location: Dewey, Ok

Re: Flex what you got

Post by XJChad »

32s it is then! ;)

Sent from my SCH-R970 using Tapatalk
1989 Grand Wagoneer, 4" Rusty's Lift, LS 5.3L swap (in progress), 4L60e, NP241c.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.

ElkyRacer
Posts: 33
Joined: Fri Jun 08, 2012 12:37 am

Re: Flex what you got

Post by ElkyRacer »

Urban wheeling at work.

Image
Image
Image

evilxj85
Posts: 4
Joined: Mon Dec 02, 2013 6:36 pm
Location: Oregon City

Re: Flex what you got

Post by evilxj85 »

I'm in the market for a waggy but this is what I got. Image. Image
User avatar

florida
Posts: 9
Joined: Wed Oct 24, 2012 3:57 pm
Location: Florida

Re: Flex what you got

Post by florida »

Image
Image
77 Cherokee
4.56 D60's
Linked w/ coilovers
35"s on steels
360/727/NWF blackbox/205

wag4x6
Posts: 65
Joined: Wed Oct 03, 2012 9:45 pm

Re: Flex what you got

Post by wag4x6 »

Both have a a TT Fab SOA/SF. The one on the right is on 35's and the other is on 33's
Image

The other side
Image
89 Gwag, stock 360, stock 727, np229, d44 front/rear, SOA/SF on 35's
User avatar

husker77
Posts: 753
Joined: Thu Jan 03, 2013 9:13 pm
Location: Glenvil, Nebraska

Re: Flex what you got

Post by husker77 »

Found something a little larger, I was surprised that I still had no tire rub.

Image


Image


Image


Image

TheJeepShop
Posts: 5
Joined: Mon Oct 28, 2013 9:06 am

Re: Flex what you got

Post by TheJeepShop »

How about no flex with a J20 with snow plow springs.
You do not have the required permissions to view the files attached to this post.
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Flex what you got

Post by TUDrewser »

That an actual still-in-service fire rig?
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.

jamesdart
Posts: 384
Joined: Tue Dec 25, 2012 4:49 pm

Re: Flex what you got

Post by jamesdart »

Image
Image

there actually is a fire dept by me that still has an m725 in service as a rescue truck. I saw they had it out one night doing some training, it looked real nice, but I didn't want to stop and check it out. that chartreuse color and white. I asked a kid I knew that was on the fire dept in the town next to them, they all know each other. he said its really nice and they use it regularly. kind of hard to believe, but at the same time, his house just got rid of 2 power wagons not too long ago.

geofro84
Posts: 7
Joined: Tue Jan 28, 2014 3:49 am
Location: Tamworth NSW australia

Re: Flex what you got

Post by geofro84 »

this is not my jeep I would like to have it this is my bosses j20 he was showing off at work 1 day
You do not have the required permissions to view the files attached to this post.

rocklaurence
Vendor
Posts: 2565
Joined: Sat Mar 30, 2013 6:53 am

Re: Flex what you got

Post by rocklaurence »

I really like the tube flat bed--very unique.
User avatar

tndonor
Posts: 191
Joined: Fri Mar 29, 2013 2:55 pm
Location: Denver, CO

Re: Flex what you got

Post by tndonor »

Very cool tube/flat bed indeed!

Not flexed out......all we could manage pushing it with a tractor while measuring for driveshafts and shocks.
Image
1967 Jeep M715. Cummins HX35/HT3B NV4500 203/205 Doubler. HP60/14B. OBW. OBA.
Ive done my part to jump start the economy

mcjeep
Posts: 2
Joined: Sat Mar 23, 2013 2:44 pm

Re: Flex what you got

Post by mcjeep »

measuring for shocks
Image

las cruces 10 i think.
Image

she dont flex quite as good now that she has anti wrap bars. for the trade off im ok with a little less flex. besides, thats what locked axles are for right?
Post Reply