Any moderators from IFSJA here?

Area for General NON-Jeep related chat. Topics are typically not moderated, but must fall within the Use Guidelines.
Post Reply
User avatar

Topic author
fadec
Posts: 28
Joined: Fri Jun 01, 2018 4:08 pm

Any moderators from IFSJA here?

Post by fadec »

A week ago I singed up at IFSJA forum, but I've been sitting on this message for a week now... "Your account has been activated but you are currently in the moderation queue to be added to the forum." Wondering if anyone over there is actually looking at the moderator queue?

Because I'm not officially on the forum, I don't have permission to post or message anyone. I can't even message any moderators or admin to ask myself.
1968 J3500 - Buick 430, SP400, D20, D44/D53 Townside
1981 CJ7 - rock crawler w/ custom tri-link suspension & coil springs, 383 stroker L98 TPI
2010 JK - all the normal bolt on stuff you can think of. 4" Currie lift, 37" tires, stubby bumpers, flat fenders and such...

will e
Posts: 5096
Joined: Sat Aug 18, 2012 8:21 am

Re: Any moderators from IFSJA here?

Post by will e »

Ristow has the most privileges on IFSJA. He's on here to but doesn't spend much time. I looked on IFJSA and he is still active so I sent him an PM for ya and referenced this thread. You might post up your new userid here.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

mx71
Posts: 246
Joined: Wed Mar 28, 2018 8:20 pm

Re: Any moderators from IFSJA here?

Post by mx71 »

Took about a week or so for me to get approved.
User avatar

Topic author
fadec
Posts: 28
Joined: Fri Jun 01, 2018 4:08 pm

Re: Any moderators from IFSJA here?

Post by fadec »

Same user ID as here... "fadec". Try to keep it the same through all the forums I'm on.
1968 J3500 - Buick 430, SP400, D20, D44/D53 Townside
1981 CJ7 - rock crawler w/ custom tri-link suspension & coil springs, 383 stroker L98 TPI
2010 JK - all the normal bolt on stuff you can think of. 4" Currie lift, 37" tires, stubby bumpers, flat fenders and such...
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Any moderators from IFSJA here?

Post by fulsizjeep »

The mothership has crashed and burned so many times, I am surprised every time I log in successfully.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac

will e
Posts: 5096
Joined: Sat Aug 18, 2012 8:21 am

Re: Any moderators from IFSJA here?

Post by will e »

He said he would get to it today!
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Topic author
fadec
Posts: 28
Joined: Fri Jun 01, 2018 4:08 pm

Re: Any moderators from IFSJA here?

Post by fadec »

Thanks guys! Was added this afternoon. All is working good now. Really appreciate your help.
1968 J3500 - Buick 430, SP400, D20, D44/D53 Townside
1981 CJ7 - rock crawler w/ custom tri-link suspension & coil springs, 383 stroker L98 TPI
2010 JK - all the normal bolt on stuff you can think of. 4" Currie lift, 37" tires, stubby bumpers, flat fenders and such...

bigun
Posts: 1250
Joined: Sat Jun 11, 2011 8:20 pm
Location: Mountainair, NM

Re: Any moderators from IFSJA here?

Post by bigun »

fulsizjeep wrote:The mothership has crashed and burned so many times, I am surprised every time I log in successfully.
I haven't been on in years, surprised to hear it is still stumbling along
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Any moderators from IFSJA here?

Post by fulsizjeep »

bigun wrote:
fulsizjeep wrote:The mothership has crashed and burned so many times, I am surprised every time I log in successfully.
I haven't been on in years, surprised to hear it is still stumbling along
Yeah, they are doing just "fine" I reckon. I hate the frickin ads over there. The place is owned by Commies with no direction. Yeah, I said it.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
User avatar

HeavyMetalThunder_81
Posts: 740
Joined: Sat Mar 17, 2012 5:01 pm
Location: Haze Gray

Re: Any moderators from IFSJA here?

Post by HeavyMetalThunder_81 »

Sorry to get off topic here, but I have to ask...
FADEC = Full Authority Digital Engine Control?
-Jonny B.
1979 Cherokee Golden Eagle - UNDER CONSTRUCTION
7" lift, 35x12.5x15
AMC 401 - Pro-FLo 4 FI
NV4500/NWFBB/NP205 - Triple Stick'd
F D44 - 4.10, Eaton E-Locker
R M23 - 4.10, Detroit Locker

1979 Cherokee Chief - Parts
1979 Cherokee Chief - Parts
1979 Wagoneer - Sold
1981 Cherokee Chief - Cubed
User avatar

Jonny Mac
Posts: 13
Joined: Fri Apr 29, 2016 12:27 pm

Re: Any moderators from IFSJA here?

Post by Jonny Mac »

Not to dredge this up, but I had my IP blocked on my phone, but not computer. I'm deployed and trying to get parts to fix up the waggy while I'm over here. Took almost a week to get the phone unblocked. No answer as to why. I had to get a VPN ap to get a new IP address to get around it. Username fine, JUST the IP on my phone. It was weird.
- Mac

89 Grand Wagoneer

Deployed to support the Jeep :mrgreen:
Post Reply