Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
my 79 J10 didn't come with a sway bar, I have one but don't know what year it's for, BJ's has the frame mounts and link for an 8" lift but not sure how the lower links are connected, could use a picture if you have one
Dunno about the trucks but the Wags had the mount on the side of the spring plate.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
In this application they are upside down and swapped left for right.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Hi Stuka, that would be great if you could,Thanks Tat and SJTD I was thinking the upper u shaped bracket was directly mount to frame but I think your telling me there was a bracket welded to frame with threaded holes for the upper sway bar bracket, and my spring plates don't have a hole for lower sway bar link guess I'll have to find some plates
sonoraed wrote:Hi Stuka, that would be great if you could,Thanks Tat and SJTD I was thinking the upper u shaped bracket was directly mount to frame but I think your telling me there was a bracket welded to frame with threaded holes for the upper sway bar bracket, and my spring plates don't have a hole for lower sway bar link guess I'll have to find some plates