threads disappeared
-
68glad
Topic author - Posts: 293
- Joined: Wed Feb 01, 2012 5:27 pm
- Location: stayton, oregon
threads disappeared
Just trying to figure out where Blake's bent front axle housing thread went. Did it disappear because of the troll that chimed in. It was an interesting one without a definate answer.
68 Gladiator- RIP
78 Wagoneer- 401, D60/70, 203/205, 38's, Dual PS pump, Hydroboost, OBA, OBW, bla bla bla.
If you don't stand for something, you'll fall for anything.
78 Wagoneer- 401, D60/70, 203/205, 38's, Dual PS pump, Hydroboost, OBA, OBW, bla bla bla.
If you don't stand for something, you'll fall for anything.
-
Stuka
- Site Admin
- Posts: 11812
- Joined: Thu May 12, 2011 5:53 pm
- Location: CA
- Contact:
Re: threads disappeared
I have been traveling, but I think that's the guy Blake banned. He may have wiped out his thread on accident.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
-
carnuck
- Posts: 3881
- Joined: Sun Mar 04, 2012 2:48 pm
- Location: Lynnwood, WA
- Contact:
Re: threads disappeared
Uhoh! I missed a troll? Was he going on about special Toyota axle goop?
Check my parts for sale near Seattle
-
ScottsMojo
- Posts: 753
- Joined: Fri Mar 02, 2012 7:37 pm
- Location: Casa de Ducati North
- Contact:
Re: threads disappeared
Lol no, much worse. He used the "ghetto" comment...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
AwesomeJ10
- Posts: 3031
- Joined: Sat Aug 27, 2011 10:26 am
- Location: Off the grid on Storm Mountain Colorado
- Contact:
Re: threads disappeared
Yeah, F that guy.
He trolls tons of forums and talks smack on 'em.
But not on here
I deleted the thread mostly because of him... But I'm also embarrassed that I thought my D60 was bent when the only thing that was wrong is the tie rod ends were shot.
Those D60 high steer arms are super short meaning that a little 'adjustment' goes a long way. Not to mention those 42's make it look worse cause they 'fan out' more. I think jumping the Honcho at the tough trucks event took out the tie rod ends causing it to look funny. The steering ram is also dripping fluid right onto the long side of the axle housing, mimicking a bent housing....
There are no other missing threads that I'm aware of..
He trolls tons of forums and talks smack on 'em.
But not on here
I deleted the thread mostly because of him... But I'm also embarrassed that I thought my D60 was bent when the only thing that was wrong is the tie rod ends were shot.
Those D60 high steer arms are super short meaning that a little 'adjustment' goes a long way. Not to mention those 42's make it look worse cause they 'fan out' more. I think jumping the Honcho at the tough trucks event took out the tie rod ends causing it to look funny. The steering ram is also dripping fluid right onto the long side of the axle housing, mimicking a bent housing.... There are no other missing threads that I'm aware of..
-
68glad
Topic author - Posts: 293
- Joined: Wed Feb 01, 2012 5:27 pm
- Location: stayton, oregon
Re: threads disappeared
Blake, thanks for the info. Glad it's not bent. At least it's an easy fix. Not sure why I wrote "threads". Should have left the "s" off.
68 Gladiator- RIP
78 Wagoneer- 401, D60/70, 203/205, 38's, Dual PS pump, Hydroboost, OBA, OBW, bla bla bla.
If you don't stand for something, you'll fall for anything.
78 Wagoneer- 401, D60/70, 203/205, 38's, Dual PS pump, Hydroboost, OBA, OBW, bla bla bla.
If you don't stand for something, you'll fall for anything.