Correct hub cap for J20?

Area for General FSJ related chat.
Post Reply
User avatar

Topic author
tgreese
Posts: 7190
Joined: Fri Jun 08, 2012 6:31 am
Location: Medford MA USA

Correct hub cap for J20?

Post by tgreese »

This is the cap my J20 has (front only)

Image

Is this a factory cap? What do the rears look like?
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS/PDB, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination A/Ts, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
Dual Everything: '15 Chryco Jeep Cherokee KL Trailhawk, ECO Green
Blockchain the vote.
Top

serehill
Vendor
Posts: 1953
Joined: Sun Nov 20, 2011 4:00 pm
Location: Mesquite Texas

Re: Correct hub cap for J20?

Post by serehill »

Nope that is a chevy hub cap
1980 Honcho 258 4 speed mostly stock with 4 " lift.

WIP

You know the rude dude from IFSJA


1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.


No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?
Top
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:
Contact fulsizjeep

Re: Correct hub cap for J20?

Post by fulsizjeep »

These are J20 hub caps on a J4800.
Image
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
Top
User avatar

j20owner
Posts: 461
Joined: Sat Aug 27, 2011 1:46 pm

Re: Correct hub cap for J20?

Post by j20owner »

I also have a set of J20 hub caps, but they are not in very good shape. Pretty much all the paint is gone and they are dented.
Tatsadasayago wrote:And here i thought Capitalism was hitting the Shift Key...
Top
User avatar

jaber
Vendor
Posts: 3067
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Correct hub cap for J20?

Post by jaber »

tgreese wrote:This is the cap my J20 has (front only)

Image

Is this a factory cap? What do the rears look like?
IIRC those are Chevy caps.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/
Top
User avatar

Kaiserman
Posts: 534
Joined: Wed Dec 28, 2011 3:18 pm
Location: Huntington, MA

Re: Correct hub cap for J20?

Post by Kaiserman »

Flints caps are correct for all year J20's AFAIK. Never seen one on a 74 though. They are actually Dodge caps that Jeeps must have bought the rights to stamp. Only difference is the center where it is stamped Jeep VS. some sort of Dodge logo I'm not familiar with.
1971 J2500 Gladiator Custom-Cab Platform Stake on 126" wb. B350/T18A/D20 D60/D60-3 w/locker 4.10's Ramsey 8klb PTO winch, Day-brook dump. 225/95R16's
1969 J3800 Gladiator 3407Z Camper Truck. B350/T18A/D20 D44/D60-3 w/4.10's
1968 Wagoneer Custom 327/TH400 Mostly Stock
1987 Cherokee Laredo 2-Door 4.0L/AW4 4" lift OEM swing out tire carrier and brushguard
Top
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:
Contact fulsizjeep

Re: Correct hub cap for J20?

Post by fulsizjeep »

Pretty sure you are right Thomas. Those 2 hubcaps came off an 87 J20 tour tram that Mesa Verde NP retired and sold a few years ago.

Image

Image

I had never noticed a Jeep under one of these before. There used to be smaller versions of this built on CJ7s used in Key West. The operators liked the CJ7 platform a lot because of the tight spaces they traveled.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
Top
User avatar

Kaiserman
Posts: 534
Joined: Wed Dec 28, 2011 3:18 pm
Location: Huntington, MA

Re: Correct hub cap for J20?

Post by Kaiserman »

I remember you posting about that thing. Was it 4WD?


I just pulled all of my J20 caps and GM trim rings off the 71. Going to make some clips and run my full disc Kaiser era 16" covers again. Hopefully with the clips they won't fall off. Stupid radial tires.
1971 J2500 Gladiator Custom-Cab Platform Stake on 126" wb. B350/T18A/D20 D60/D60-3 w/locker 4.10's Ramsey 8klb PTO winch, Day-brook dump. 225/95R16's
1969 J3800 Gladiator 3407Z Camper Truck. B350/T18A/D20 D44/D60-3 w/4.10's
1968 Wagoneer Custom 327/TH400 Mostly Stock
1987 Cherokee Laredo 2-Door 4.0L/AW4 4" lift OEM swing out tire carrier and brushguard
Top

mrtazwrench
Posts: 152
Joined: Sun Aug 21, 2011 11:58 am

Re: Correct hub cap for J20?

Post by mrtazwrench »

j20owner wrote:I also have a set of J20 hub caps, but they are not in very good shape. Pretty much all the paint is gone and they are dented.
Those sound perfect for my 82 J20 plow truck. :D
Top
User avatar

j20owner
Posts: 461
Joined: Sat Aug 27, 2011 1:46 pm

Re: Correct hub cap for J20?

Post by j20owner »

I was thinking someone somewhere had asked if I was going to use them, and I'm not. ;)
Tatsadasayago wrote:And here i thought Capitalism was hitting the Shift Key...
Top
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:
Contact fulsizjeep

Re: Correct hub cap for J20?

Post by fulsizjeep »

Kaiserman wrote:I remember you posting about that thing. Was it 4WD?
Why yes it was. It was put in low range at the factory and no shifter on it. Can you imagine getting it in high range and go for a real ride? It had a 258/727/208 with less than 50k miles on it. That many miles in low range may have caused some tcase wear though.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
Top

mrtazwrench
Posts: 152
Joined: Sun Aug 21, 2011 11:58 am

Re: Correct hub cap for J20?

Post by mrtazwrench »

j20owner wrote:I was thinking someone somewhere had asked if I was going to use them, and I'm not. ;)
Let's see if we can make a deal. :D
Top
Post Reply

Return to “General FSJ”