Full Size Jeep Network

I did some research and some checking. Found that the fittings used on the early model mustangs 66-68 are the same fittings used by the Sanden 709 I have in my Jeep. I have found places which sell them, but they are spendy. Can any of you confirm this?

One example...

https://www.ebay.com/itm/1964-66-MUSTAN ... 0282102297

Thought I had another link, ill have to find it...

Peace

The seller is classic auto air, who is well know and a major retrofit and rebuilder of vintage systems. Why not call them and confirm? $50 for a pair immediately available with 134 valves would be pretty fair. You might save a few bucks looking around but not enough to keep suffering without ac

Xplitive wrote:The seller is classic auto air, who is well know and a major retrofit and rebuilder of vintage systems. Why not call them and confirm? $50 for a pair immediately available with 134 valves would be pretty fair. You might save a few bucks looking around but not enough to keep suffering without ac

Your point is well taken Thanks!

Did you check ackits.com?

They also have a good forum.

I will call them and make sure they have the one I need...thanks!!

Those are R12 flare fitting,backseating valve for a rotoloc york compressor, are sure thats what you have?, more common is tube-O 134A srvice port with o-ring fitting upgrade

http://www.uacparts.com/legacy/Search/F ... ube-O.html, this is a tube-O there is also #8 and #10 O-ring service ports on aftermarket 709"s, if you have flare fitting hoses there are adapters to convert from 0-ring to flare at the hose fitting, post a picture of your old valve/compressor/hoses to ID

Maybe post a picher of your pump with the valve removed?

I have the older r12 fittings....retro fitted for 134....

ill post a pic, let me pen tapatalk.

sorry if I seem fixated on these parts, I want to be sure to get the right ones.... Thanks for putting up with me

I posted pics with my tapatalk...but for some reason they have not showed up here yet...