Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I' m ready to replace my tailgate glass (GW) by a better one; i' ve got the glass, a new bottomstrip and the rubber seal. Can i Just try and squeeze the glass in or do i need extra sealant to go between the glass and the seal?
Thanks!
No sealant required. I've read on the forums that it can be a pretty tight fit.
Mine was glued in with no rubber strip, presumably from the factory.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
wag86 wrote:It worked! And i didn't have to wack with a hammer; i was able to slide it on from left to right with the help of soapy water and some persuasion.
Good deal! Probably the easiest rear glass job ever in your case.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior) AMC 360 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses Ongoing thread-viewtopic.php?t=11897