What do you mean by "set the idle"?toothofwar wrote:No matter where I try to set idle at it won't run. But if I unplug the wire, it fires right back up and does decent. Just won't take any throttle at all. Here is a little video of me tinkering with it.
The screw on the TB isn't for idle speed, it's for throttle blade adjustment for minimum air setting.
Since it runs w/o timing wire connected...do the minimum air adjustment procedure with IAC disconnected as Bill outlines.
Set TPS voltage. Then leave the screw on TB alone.
Then try setting the timing for say 5*, then reconnect timing wire and see what happens.
Do you know for certain the .bin has 0*??? If it doesn't your timing will be way off when ecm timing control is connected.
If it runs better @ 5*, try 10*, and see if it's better.