Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hi All, Im new here. I currently own a 1954 Willys Truck, and I am looking to get a 67 J3000 to convert into a daily work horse. How are the 327 Vigilante Engines? Ive done a bit of research, but have not been able to find personal testimonies. She has 90k on her and has been sitting for the past year and a half.
The 327 is a good engine. Lots of torque, plenty reliable.
BUT... They are almost impossible to find internal parts for. Starters are also getting harder to find. We have several people here that drive theirs a lot, but if you ever needed to rebuild it, it would most likely be time for an engine swap.
I’ve been happy with mine and wouldn’t hesitate to buy another 327 powered fsj. The starter can’t be bought new or reman so you’re left with rebuilding. Performance parts aren’t out there but a rambler 4bbl intake and dual exhaust with a pertronix swap gets you pretty good results.
44bz wrote:I’ve been happy with mine and wouldn’t hesitate to buy another 327 powered fsj. The starter can’t be bought new or reman so you’re left with rebuilding. Performance parts aren’t out there but a rambler 4bbl intake and dual exhaust with a pertronix swap gets you pretty good results.
Sent from my iPhone using Tapatalk
How many miles have you gotten out of your engine? Any idea of your gas mileage?
Stuka wrote:The 327 is a good engine. Lots of torque, plenty reliable.
BUT... They are almost impossible to find internal parts for. Starters are also getting harder to find. We have several people here that drive theirs a lot, but if you ever needed to rebuild it, it would most likely be time for an engine swap.
I was astonished how little parts are available. My plan was to run the 327 until she finally kicks it, and then drop in a good diesel to make her last forever. Thanks!
Lots of parts can be found on rockauto, kanter, and other sites. Searching by amc cars with the same motor helps also. I wouldn’t hesitate buying a 327 powered fsj. It might be a rare unsupported motor but it’s solid and I personally have enjoyed working on and driving it.
44bz wrote:Lots of parts can be found on rockauto, kanter, and other sites. Searching by amc cars with the same motor helps also. I wouldn’t hesitate buying a 327 powered fsj. It might be a rare unsupported motor but it’s solid and I personally have enjoyed working on and driving it.
Sent from my iPhone using Tapatalk
I was definitely a bit uneasy about it (due to parts) but you’re selling me.
Welcome to the forum. My first V8 car was a 65 Ambassador with 327. It took a lot from me when I was a teenager, especially after I put the 4 speed in. As a result, I think it is a great motor.
It was a great design in its day. Forged steel crank, forged steel rods, massive block. The first generation V8s are very heavy. Look at Kanter auto parts https://www.kanter.com/index.aspx?DeptNo=1400 for some idea of parts availability and prices. Same block as the AMC 250, 287 and 327.
If you keep oil in the engine, it should be very reliable and durable. They are reputed to be very smooth-running engines too. However, if I wanted to put more than a few thousand miles a year on this truck, I would consider a somewhat newer version that would be easier to service. In 1968, Jeep switched to the Buick 350 cid V8, and then in 1971 to AMC's own V8s, both of which are much more easily serviced if you need to refresh the engine from wear or an unlikely catastrophe. Or you could look around for an extra engine or two to put away in case you need a scarce component (like a camshaft?) There is an aftermarket geared starter available that replaces the impossible-to-find original Prestolite starter. Supposedly fuel pumps are also scarce, but you can switch to an electric. You will encounter issues like this.
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS/PDB, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination A/Ts, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
Dual Everything: '15 Chryco Jeep Cherokee KL Trailhawk, ECO Green
Blockchain the vote.
Looks like a good project truck. I would make sure to turn that engine over with a wrench before trying the starter, as it looks like it has sat for a while a while. You do NOT want to break the rings on that.