Full Size Jeep Network

On my GW project all of the centercap screws are broken off. Does anyone know the proper size for the replacements? Also does anyone have any experience repairing this problem? I was thinking of using self tapping screw instead of drilling and re-tapping the holes. Any thoughts or recommendations?

Id drill and retap... If you use a self tapping screw you risk cracking the rim if you mean to make a new hole i would think. Not worth it. That or the screw gets stuck and breaks off lol

i have the same issues.. i can still mount all 4 caps. but they are all using odd sized screws and they all have 1 broken screw in the wheel.. ima jist drill all the holes out and tap them and put in some stainless screws

Thanks - I will probably end up drilling and taping them - Does anyone know what size hole and threads?

TGW sells the exact replacement... I bought them and next time I hit the hardware store will compare and post up here. All my center cap screws had been replaced at some point by smaller screws. Got tired of waiting for that sound when you know you’re about to lose one!