Ultimate FSJ Cup holder

Area for General FSJ related chat.
Post Reply
User avatar

Topic author
Jonnyworld
Posts: 86
Joined: Sat Nov 05, 2016 12:02 pm

Ultimate FSJ Cup holder

Post by Jonnyworld »

I was tired of holding cups in my lap so I got to looking around the garage. For something that would work. I don't like the plastic crap at the auto parts stores.
Hey that unused oil filter, that goes to who knows what, is about the right shape. Out comes the bandsaw and drill. Then a little vacuum hose to cover the rough edge. Perfect!!! 30 minutes work and I had everything laying around the garage

.Image
Image
Cut just under the lip with a bandsaw
Image I bent this framing tie
Imagethe sticker on the framing tie
Imagea few bolts through the framing tie and a couple self drilling screws into the floor
Imagetime for some Popeyes.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Last edited by Jonnyworld on Tue Apr 18, 2017 8:28 am, edited 1 time in total.
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift

I can fix it or fix or I can fix it where no one else can."
Top

will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Ultimate FSJ Cup holder

Post by will e »

Pretty clever!
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Top
User avatar

REDONE
Posts: 2678
Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO

Re: Ultimate FSJ Cup holder

Post by REDONE »

Nice! :-bd
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
Top

prospector
Posts: 91
Joined: Mon Apr 17, 2017 9:40 am

Re: Ultimate FSJ Cup holder

Post by prospector »

Clever idea, I might try that.
Top

ShagWagon
Posts: 702
Joined: Tue Apr 19, 2016 8:13 pm

Re: Ultimate FSJ Cup holder

Post by ShagWagon »

Any cup holder that hold a big gulp is a good cup holder.
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.
Top

FSJ Guy
Posts: 1763
Joined: Fri Mar 15, 2013 3:03 pm

Re: Ultimate FSJ Cup holder

Post by FSJ Guy »

Cool!

Just be sure to start with a NEW filter!!!
Ethan Brady

http://www.bigscaryjeep.com

Jeepless, but I still have a lots of old parts in my garage!
Top
User avatar

Topic author
Jonnyworld
Posts: 86
Joined: Sat Nov 05, 2016 12:02 pm

Re: Ultimate FSJ Cup holder

Post by Jonnyworld »

FSJ Guy wrote:Cool!

Just be sure to start with a NEW filter!!!
For sure. I believe the filter on my waggy has more oil on the outside than on the inside.

Sent from my SAMSUNG-SM-G900A using Tapatalk
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift

I can fix it or fix or I can fix it where no one else can."
Top
User avatar

MadMax78
Posts: 452
Joined: Tue Mar 26, 2013 12:40 pm
Location: Guin, AL

Re: Ultimate FSJ Cup holder

Post by MadMax78 »

I've been looking for some cool way to make cup holders. I just may steal your idea. :D
MadMax78

78 Cherokee S, Wide Track, 360, TH400, Quadra Trac, TAD's SOA, 35" BFG KM2, Edelbrock Carb & Intake, MSD Coil & Ignition
Top
User avatar

Topic author
Jonnyworld
Posts: 86
Joined: Sat Nov 05, 2016 12:02 pm

Re: Ultimate FSJ Cup holder

Post by Jonnyworld »

MadMax78 wrote:I've been looking for some cool way to make cup holders. I just may steal your idea. :D
Make sure to post a pic. Id love to see how yours turn out. I wanted to keep the lip at the top of the filter but i didnt have a hole saw the right size to cut it that way so i chopped with a band saw. I think it would loo much better and wouldn't need the vaccum hose if it cloud be cut form the end with a hole saw.

Sent from my SAMSUNG-SM-G900A using Tapatalk
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift

I can fix it or fix or I can fix it where no one else can."
Top
User avatar

66stepside
Posts: 3793
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: Ultimate FSJ Cup holder

Post by 66stepside »

That's frickin' sweet!
Top

v8vendetta
Posts: 84
Joined: Tue May 09, 2017 2:09 pm
Location: Gillette, WY

Re: Ultimate FSJ Cup holder

Post by v8vendetta »

I always buy one of these if I need a cup holder: http://www.tuffyproducts.com/p-105-stan ... older.aspx
1976 Jeep J-20
401 V8 w/ CRT HEI conversion
Blown TH-400
--------------------------------------
1989 Grand Wagoneer
360 V8
727
Top
User avatar

jpswapmohn
Posts: 657
Joined: Sun Mar 02, 2014 6:08 pm
Location: CO

Re: Ultimate FSJ Cup holder

Post by jpswapmohn »

Those work great on the front of ammo cans when making center consoles. I have one in the YJ Mutt.
One day I will wake up and realize that my jeep is complete...one day, I just know it.
88Wag, LT1/4L60E/NP242, J20 axles, etc. http://imgbox.com/g/rNuIasKYrS
95YJ, STaK, D44's, SOA, ARB's, Bilstein 5150s, 35" KM2's
50 CJ3A
77 J-10 (sold)
Top
User avatar

REDONE
Posts: 2678
Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO

Re: Ultimate FSJ Cup holder

Post by REDONE »

Dang, man. I've opened this thread probably 5 times since I posted in it, and the more I look at it the more I want to steal your idea! Thanks again for posting this. I'm switching from a bench to buckets and building a cooler holder/carseat mount for the center, but once I figure it all out and build it I'll see how to follow your lead.
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
Top
Post Reply

Return to “General FSJ”