Stop in say howdy

Area for General NON-Jeep related chat. Topics are typically not moderated, but must fall within the Use Guidelines.

Topic author
Gambler
Posts: 52
Joined: Wed Jul 06, 2011 4:28 am

Stop in say howdy

Post by Gambler »

howdy!
;)
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Stop in say howdy

Post by Tad »

Gambler wrote:howdy!
;)
HowDo

I'm here, always have been.
Even when this site went down I was still pulling archived images from my build from here.

Busy as heck with the new year and the rig is still down right where the flatbed dropped it after Ouray.
Plan to rip all the Projection stuff off and go back to carburation as soon as the pennies can get saved.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
User avatar

Tin Medic
Posts: 529
Joined: Sat Aug 27, 2011 12:48 pm
Location: Ft. Carson, CO

Re: Stop in say howdy

Post by Tin Medic »

Awesome, another FSJ site. 2 times the fun. Looking forward to seeing everyone over here also.
89 GW 360/727/208 (soon to be LQ9/727/208) MSD 8523 Pro Billet Distributor, MSD 8207 Blaster SS Coil, 30x9.5x15 Destination M/Ts, Warn Lock Out Hubs

"I don't always downshift, but when I do its next to a Prius so the driver can hear me hurt the environment."

Jeeps don't break down, they're just extremely demanding when they need parts replaced!

Jeep Owner

The Colonel
Posts: 2
Joined: Sat Aug 27, 2011 2:42 pm

Re: Stop in say howdy

Post by The Colonel »

Tin Medic wrote:Awesome, another FSJ site. 2 times the fun. Looking forward to seeing everyone over here also.
Ditto!
User avatar

plasticboob
Posts: 46
Joined: Tue Aug 23, 2011 9:07 pm

Re: Stop in say howdy

Post by plasticboob »

*waves to everyone* Looking good, Stuka! You weren't able to save the old database though? There was lots of good info here. :?
Rob
1974 Cherokee S, fuel-injected 401,Trans-am Red, Aussie locker 'out back'
Click here for video
User avatar

jaber
Vendor
Posts: 3066
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Stop in say howdy

Post by jaber »

I made it, wheres the beer.?.?.?
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/
User avatar

Stuka
Site Admin
Posts: 11806
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Stop in say howdy

Post by Stuka »

plasticboob wrote:*waves to everyone* Looking good, Stuka! You weren't able to save the old database though? There was lots of good info here. :?
Yeah, unfortunately trying to import a database from a several versions old copy of PHPBB has proven to be difficult.

At this point if I am able to get it working, it will probably be a secondary forum that is locked down and read only. Basically an archive.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: Stop in say howdy

Post by lobie »

Stuka wrote:
plasticboob wrote:
Yeah, unfortunately trying to import a database from a several versions old copy of PHPBB has proven to be difficult.

At this point if I am able to get it working, it will probably be a secondary forum that is locked down and read only. Basically an archive.
Doing good. I like the layout of this forum.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com

jpcoutts
Posts: 49
Joined: Sat Sep 03, 2011 7:30 pm
Location: Hot Springs, AR

Re: Stop in say howdy

Post by jpcoutts »

So far so good! I guess all of our member info on the old site is just lost in cyber never-never land!
User avatar

The PIG Smith
Posts: 507
Joined: Sat Sep 03, 2011 10:54 pm
Location: Fort Wayne, Indiana

Re: Stop in say howdy

Post by The PIG Smith »

Here is my obligated "Howdy"!
And another..."looking good so far"!

I hope that you can recover that database from your old forum.
There was a member on your old forum that had a small write up about using a Chevy stepside bed on a J10.
It really looked good.
I thought until now, that info was lost.
Maybe there some small hope.

Oh..if I recall...there was this crazy welding instructor from some desert place that had a lot of really silly ideas and even wilder projects.
I hope you keep that sorta riff-raff outta here!
<hehehe just messing with ya Tad!>

Thank you for bringing this place back from the server failure la-la land and Thank you for allowing riff-raff like me to be a part of it.
Bryan Smith
Fort Wayne, Indiana
2017 Jeep Grand Cherokee Limited
- 75th Anniversary Edition - 1941 Trim Package - Recon Green --Daily Driver
1986 Jeep J20
- Super clean rig from the AZ/CA state line -- Current Project
1982 Jeep J10
- Has become a Long Term Project.
1981 Jeep J20
- Commercial flat bed - Lost in a Divorce --gone
1987 Jeep J20 Pioneer
- Former Rick Bielec aka Ricbee plow rig. Major rust!! --gone

IFSJA Member #1933 Joined November 30, 2001

Topic author
Gambler
Posts: 52
Joined: Wed Jul 06, 2011 4:28 am

Re: Stop in say howdy

Post by Gambler »

Good to see some action here!

Tad, good reply on the board over there. :-bd
User avatar

Don S
Posts: 212
Joined: Tue Aug 23, 2011 7:33 pm
Location: Near Burleson Tx

Re: Stop in say howdy

Post by Don S »

..

Howdy folks:

I had a jeep the last time I was here.... But I still am finding parts scattered about the homestead. Thinkin' I'll scatter them in and on my Frontier 4x4. I'll have an FSJ... Frontier Sized Jeep... :-o

Have a good one... or two.. Don S..

janie
Posts: 3
Joined: Tue Sep 13, 2011 8:23 pm

Re: Stop in say howdy

Post by janie »

Hi fellas. Brandon, your site looks great. Out of the FSJeep game. No clue if I'll return. Doubtful. Appreciate the opportunity to drop in from time to time to see how y'all are doing.
User avatar

Stuka
Site Admin
Posts: 11806
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Stop in say howdy

Post by Stuka »

Oh for sure. You guys are always welcome to stop by and say Hi :)
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

Addicted
Posts: 132
Joined: Wed Sep 14, 2011 6:11 am
Location: Byron, MI

Re: Stop in say howdy

Post by Addicted »

Howdy! :-h

shaggywaggy88
Posts: 5
Joined: Tue Sep 13, 2011 6:59 pm
Location: Lynchburg VA

Re: Stop in say howdy

Post by shaggywaggy88 »

Howdy, Im glad to have an alternate site. IFSJA is getting sketch
88 GWag- 4" lift, 31s, Razor grill
Im not the killer man, Im the killer Mans son. But Ill do the killing till the killer man comes. RLTW
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Stop in say howdy

Post by jsinajeep »

Yep, I am here to say hey and I will be watching on here also.
User avatar

Jeffsj
Posts: 132
Joined: Wed Sep 14, 2011 8:26 am
Location: Prescott, Az.

Re: Stop in say howdy

Post by Jeffsj »

How goes it everyone? Glad to see another place to talk fsj. Hope it all goes smoothly and thanks!
Jeff

Beast : 1979 Cherokee Chief
Engine : 2003 GMC 5.3 liter Vortec
Trans. : 2002 4L60e / Transfer Case : 1989 NP241C with Slip-yoke eliminator
Lift : 4" / Tires : 33/12.50./15 BFG KM2's
Dakota Digital dashboard cluster

My 5.3 swap thread:
http://fsjnetwork.com/forum/viewtopic.php?f=12&t=767
Video: http://www.youtube.com/watch?v=XrqX1ip2KkM
Tad's SOA/Shackle Flip installation: http://fsjnetwork.com/forum/viewtopic.php?f=13&t=3347
User avatar

whsii
Posts: 354
Joined: Thu Sep 15, 2011 4:01 pm
Location: Frankfort, KY

Re: Stop in say howdy

Post by whsii »

Hello all From Kentucky.

WH here.

Stuka, this is a nice set up, glad to be part of it.

I got your PM, I could not PM you back, if you would please correct my mistake on the personal info I would appreciate it.

Thanks!
User avatar

Stuka
Site Admin
Posts: 11806
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Stop in say howdy

Post by Stuka »

Fixed.

Not sure why you couldnt PM though. Was the option not there, or did it say you did not have privs or something?

EDIT: oh yeah forgot, new members can't until they have 5 post. This is in case a bot happens to get registered, that way it can't mass spam everybody. Once you are no longer a "New Member" you will be able to PM.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Post Reply