Hey guys I'm helping Wyatt rebuild his 360 now too after we discovered it's burning alarming amounts of oil, the exhaust valves are coated despite a pretty long run before pulling the motor.
His 91 has 2.73 gears and he has no desire to change that or run larger tires. I've given him my 1970 360 4 barrel non EGR intake to run with an Edelbrock 600 CFM until he can save up for a better carb. Ideally a street demon, for the itty bitty primary bores. We'll touch up the heads to smooth the transitions a little but otherwise, the motor will be stock with no emmisions requirements.
What would your choice be for a tourqe focused low revving cam for his motor be? He has a budget of around $200 for cam and lifters.
My first choice would be a summit k8600, but I think that's more overlap than he needs. He puts it in drive and let's the transmission shift at the governor. I've never seen him go higher.
I'm thinking this Howard's with less overlap may be better: https://m.summitracing.com/parts/hrs-cl312481-11
What would you guys choose?