Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Spent about 8 hours the other day measuring, mocking up and cutting metal. I highly recommend the Lenox metal saw blade for a circular saw, 7 1/4" blade. Expensive ($50 at Lowes) but every penny worth it and can be re-sharpened. Cut 1/4 plate, 2x2 and 2x6-1/4" all day long like nothing. Never even took out the metal chop saw. Oh and that was with a $10 skill saw that is about 12 yrs old.
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress
They are pretty loud but put out limited sparks and make very clean cuts. Like I had mentioned my circular saw is much older and I think only pulls 4500 rpms. I think the max on the blade is 5500 rpms. I used a little wd40 on my cut lines and a bit on the blade and worked perfect.
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress
I've used those before. At work we use metal cutting circular saws all the time. We rarely even bring a torch on the job anymore. Evolution, morse, and my favorite the Milwaukee. They also make them in different size blades. 8 and 9". Harbor freight used to make a saw too that was ok for a homeowner. I'm not sure I they still have it.
I used to get these used crosshatched Diamondite blades for $5 each at Boeing Surplus and they were awesome! I'd go through solid steel 2" bar in 1/8th the time it took to use the band saw. They don't sell that stuff anymore tho.
Im surprised it lasted so long with minimal lube. That's awesome! I had the HF dual blade saw and loved how it worked but they break and I couldn't deal with it not being reliable. Craftsman has one but I couldn't source replacement blades for it and Sears said that it was being discontinued. I'd love to have a reliable Dual saw but cant find one.
the evolution stuff doesn't really hold up that well. to be honest, on the job the only time I ever used a lube on one of these saws was cutting aluminum. we never use it on steel. the blades last pretty long. the problem with them is the cutting teeth get knocked off real easy, if you pinch the blade or bind it. on all the forums I go on, any time I see guys asking what too l to buy to cut steel with, I always recommend one of these saws, or blades. they really are awesome. they work pretty good up to 3/8". I think the worm drive saws are better if you are just buying a 7 1/4" blade to put on a regular saw. they spin slightly slower.
racerx12003r1 wrote:So, what ya making now Surf? All that steel? Gonna be at the Fall run in Uwharrie? I know, I know, all these questions.
Not sure what I'm gonna tackle next but I need to take the sliders back off, clean them up and paint them. Also been working on slowly gathering parts to go soa and rear Chevy springs. And then of coarse I need to finish the front bumper. That being said it's been super busy lately so I don't know that much will be changed for the fall ride
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress
I heard that. I was looking at some pictures the other day that Seth took of your sliders. I really liked the way you tucked them up. I finally broke down and got me a good welder the other day. Got jealous of how good yall's welds looked compared to mine with my HF special.
racerx12003r1 wrote:I heard that. I was looking at some pictures the other day that Seth took of your sliders. I really liked the way you tucked them up. I finally broke down and got me a good welder the other day. Got jealous of how good yall's welds looked compared to mine with my HF special.
Thanks for all the compliments. My welds have a long way to go to resemble anything good but they held rock solid and that's all I could really ask for with my first metal fab project. I'll have to say though I think its my new favorite hobby, had a blast making everything. Good luck on your projects!
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress
I bought the Diablo at HD a while back and put it on an old Skil saw and it worked great, I want to get a 12" for my chop saw because it so much faster than my 4x6 horizontal bandsaw.