Does anyone have any experience with a lift

This is a place to share about tools and workspaces
User avatar
yz400e
Posts: 87
Joined: Thu Jun 09, 2016 5:59 am
Location: Erbil

Does anyone have any experience with a lift

Postby yz400e » Sat Feb 17, 2018 11:34 am

Like this one ?
Any idea on brand or price ? is it even available in the U.S. ?

I like it because it is portable and has a capacity sufficient for an FSJ

I have seen it lift up Toyota Hilux's / VW pickups / Ford Rangers (Euro version) and VW passenger vans.

looks scary as hell when it is up but the mechanics here don't seem to mind standing under the vehicle when it is in the up positon.

If I have a chance I'll get more photos when it is raised.

Imagecar_lift_2 by Mark Wise, on Flickr

Imagecar_lift_1 by Mark Wise, on Flickr

User avatar
Stuka
Site Admin
Posts: 8379
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Does anyone have any experience with a lift

Postby Stuka » Sun Feb 18, 2018 1:21 pm

I have never seen that type. It looks like it still needs to be bolted in place?
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
yz400e
Posts: 87
Joined: Thu Jun 09, 2016 5:59 am
Location: Erbil

Re: Does anyone have any experience with a lift

Postby yz400e » Wed Feb 21, 2018 7:33 am

I went and had another look at it. there are tabs for bolts but it is not bolted down.

here is a shot with a vehicle on it

[url][url=https://flic.kr/p/21N6sNj]Image[/url]lifted_1 by Mark Wise, on Flickr[/url]

[url][url=https://flic.kr/p/24y687M]Image[/url]lifted_2 by Mark Wise, on Flickr[/url]

User avatar
Stuka
Site Admin
Posts: 8379
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Does anyone have any experience with a lift

Postby Stuka » Wed Feb 21, 2018 8:52 am

With it that high, that seems sketchy to me. It has support arms going out towards the back of the vehicle, but not the front.

I take it you are in NZ or Australia, since we don't get the Amarok here.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
yz400e
Posts: 87
Joined: Thu Jun 09, 2016 5:59 am
Location: Erbil

Re: Does anyone have any experience with a lift

Postby yz400e » Wed Feb 21, 2018 12:12 pm

I am in Austria. I have been meaning to get a close up of the ID plate so I can look it up more but I think you just answered my question...that brand / model isnt available in the US.

I would like to have a lift. I have not taken the time to research lifts mainly due to never being home to actually need a lift but that may change so I'm now starting to think about tools I want to make my life easier when working on vehicles and this one looked ideal because it could be moved out of the way. there is probably something similar in the US, I just need to start looking.

User avatar
Stuka
Site Admin
Posts: 8379
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Does anyone have any experience with a lift

Postby Stuka » Wed Feb 21, 2018 12:43 pm

Ahh yeah, europe would have the Amarok as well.

I have seen some portable ones just looking around, but any of the high lift ones just look really scary. And of course they are all from China.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
yz400e
Posts: 87
Joined: Thu Jun 09, 2016 5:59 am
Location: Erbil

Re: Does anyone have any experience with a lift

Postby yz400e » Thu Feb 22, 2018 8:08 am

last comment on this one.
it is a Finkbeiner, model FHB3000
it weighs 900kg
it can lift 3000 kg
it is made in Germany,

and several years ago they cost around 7000 euro's.

not cheap.
but it sure would be nice.

User avatar
Stuka
Site Admin
Posts: 8379
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Does anyone have any experience with a lift

Postby Stuka » Thu Feb 22, 2018 8:23 am

I would trust a german made one WAY more than a chinese one!
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

letank
Posts: 2308
Joined: Wed Oct 03, 2012 9:16 pm
Location: SF bay area

Re: Does anyone have any experience with a lift

Postby letank » Tue Feb 27, 2018 6:32 pm

So what is the "mechanism" that lift the arms, chains? gears? I mention the chain because a friend got a lift with 4 legs driven by chains and at some point one of the PO fiddled with the chain and replace the triple link with a single link... and yes the lift collapsed, but fortunately nobody was injured, only the expensive 1930ish toy took a dive off the lift with serious damages.

interesting, electro-hydraulic

https://www.finkbeiner-lifts.com/produk ... 6a65022585

220v or 400v

and wildfire for us in the states

www.WildfireLifts.com
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (226 Kmiles... the running test lab)
See Engine bits and Fuel and brake lines, and Body work


Return to “Tools and Garages”

Who is online

Users browsing this forum: No registered users and 1 guest