Project Unicorn WOT

FSJ Related Events in the Mountain Time Zone
Post Reply
User avatar

Topic author
rstep
Moderator
Posts: 1237
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Project Unicorn WOT

Post by rstep »

The 16th of Aug. we will have the waggy over at Casey's shop to mount the new tires ,do a complete brake job and change all the fluids if you want to help let us know we'll start around 9 am if you need directions PM me.
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Project Unicorn WOT

Post by Tad »

Works for me.
Let me know what weaponry I should bring.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project

will e
Posts: 5097
Joined: Sat Aug 18, 2012 8:21 am

Re: Project Unicorn WOT

Post by will e »

I am going on the annual Crown King Run...
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Project Unicorn WOT

Post by Gumby »

Unless something comes up I will be there.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Project Unicorn WOT

Post by Gumby »

Any updates on this and I guess the time is still solid?
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)

AzUnicorn13
Posts: 2
Joined: Sun Jul 27, 2014 5:27 pm
Location: Arizona

Re: Project Unicorn WOT

Post by AzUnicorn13 »

:banghead: Sorry I won't be there guys! Couldn't get anyone to take my shift. :-?
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Project Unicorn WOT

Post by fulsizjeep »

Y'all have fun! Wish we could get in on some of that.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
User avatar

Topic author
rstep
Moderator
Posts: 1237
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Project Unicorn WOT

Post by rstep »

Good day , started with no start for fuel ,tank empty , 5 gallons in good to go for fuel. But then no start . To the parts store or starter relay Thanks Casey. Got it to the shop and up on a lift complete front brake job rotors ,calibers ,lines pads.
Got to the back and found the bearings were bad both sides so bearing ,brakes, all new in the back, oil change also was done. We also got some new tires on her.
Thanks Beca, Conner ,Casey, Martin and Tad .And Mari and Jess for the pizza and drinks.
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Project Unicorn WOT

Post by jsinajeep »

Sound like a good work day.
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Project Unicorn WOT

Post by Gumby »

It was a great day, learned who had s da man when it comes to doing drums. :D Give him a small screwdriver and it's all good.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
Post Reply