Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hey guys I would like to host a fab day at our place in Tucson sometime in March.
Things to think on projects will have to be things we can get done in 6 or so hours . We have welders , plasma , benders and all the clamps and hand tools.
If you know what you would like to build and out of what we can have it here for you in steel.
1969 J-2000
350 Buick
Turbo 400/ dana 20
1977 J-10 frame and updated Dana 44's front and rear.
1964 Wagoneer
230 Tornado I-6 3 speed on the column
64,000 original miles
I'm in for some rock sliders! Especially if the Divas are welding...
And if dates are open, the last weekend in March works best for me (3/29-30). But I will make other days work. That weekend would just put me in my wife's graces a little more.
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
A collection of 1966 to 1986 parts. Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks (Join date = Friday the 13th)
I hope no one gets flashed and needs to be guided by his bells. I too like Drew's days. I will know more later next week. So do we take the raw materials with us if we can? Sliders for sure would be my build.
Okay did some checking on steel prices for Beca .
round is at 54.00 for a 20' stick 1.75 11 gauge
square is at the same
I have all the plate needed or will have by then.
Looks like the 29 of March works .
Jerry
Drew
Tad
Beca
Bob
Martin
Awesome! I think my plan is this: Trailer the Jeep with the family down to visit friends in Cochise on Friday. Early Saturday morning I'll drive the Jeep from Cochise to Bob's, then back on Sat night. Head home Sunday with the Jeep on the trailer. That way my wife gets to visit her best friend and I get to work on the Jeep. I'll probably at least have my 13yr old, Justin, with me. He loves this stuff. Too bad he can't be my designated driver going back Sat night...
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
So either you have a tendency to try and catch birds, or it's in case you get lost, others will know where you are?
Do not be scared of my ballet costume.
A collection of 1966 to 1986 parts. Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks (Join date = Friday the 13th)
Maybe I could get one of y'all to look at my carb and choke too...figure out my cold starts. Of course, at the rate parts are arriving, I may be TBI by then...
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
okay It's getting close. Looks like there will be 7 of us .
Rock slide for 2 Drew's we will finish and have on , Martin we will start. Interior tire carriers we can start and Diff rings for Jerry.
Plus a delivery of 1 401 engine.
Let's call it 7am for time Jerry will be here by 8:30