Fab Day

FSJ Related Events in the Mountain Time Zone
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Fab Day

Post by Gumby »

rstep wrote:okay It's getting close. Looks like there will be 7 of us .
Rock slide for 2 Drew's we will finish and have on , Martine we will start. Interior tire carriers we can start and Diff rings for Jerry.
Plus a delivery of 1 401 engine.
Let's call it 7am for time Jerry will be here by 8:30
Where did that "e" come from? I will see you all around the molten metal folks. Safe drive South for you travellers and let's get ready to burn 8-) .
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Fab Day

Post by jsinajeep »

Gumby wrote:
rstep wrote:okay It's getting close. Looks like there will be 7 of us .
Rock slide for 2 Drew's we will finish and have on , Martine we will start. Interior tire carriers we can start and Diff rings for Jerry.
Plus a delivery of 1 401 engine.
Let's call it 7am for time Jerry will be here by 8:30
Where did that "e" come from? I will see you all around the molten metal folks. Safe drive South for you travellers and let's get ready to burn 8-) .
hum, I had just changed all my stuff and added an E to your name. Now I need to go back a change everything again :roll:

bigun
Posts: 1250
Joined: Sat Jun 11, 2011 8:20 pm
Location: Mountainair, NM

Re: Fab Day

Post by bigun »

Tad wrote:
Stuka wrote:
Tad wrote:I will be there with bells on.
So either you have a tendency to try and catch birds, or it's in case you get lost, others will know where you are? :P
Do not be scared of my ballet costume.
It's a sight I wish I could forget! :-bd
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

Must have been thinking of gumbeeeeeee

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

I'm still in, but looks like I'm coming from Phoenix instead of Cochise now. Still shooting for 7am, but will probably be later if I factor in coffee stops. And I'm bringing my oldest too, if he can get his butt out of bed ;-)

EDIT: And oh look! This makes post 1000! Which means I officially have said the least amount of useful info in the most posts of any newbie on the board.
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Fab Day

Post by Gumby »

Freaking hilarious Drew. See you both then.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
User avatar

rstep
Moderator
Posts: 1238
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Fab Day

Post by rstep »

What " e" Martin ,oh the e in edit. I'm so ready to burn steel...
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

So, tomorrow should be interesting. I drove the Jeep to the store and back and then up onto the trailer. When I was strapping it down I noticed Coolant all over the place. Looks like my water pump is going out. So I threw in some extra coolant for my hour drive tomorrow morning. If you don't see me, may want to send the tow truck...

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

Any chance one of you is really fast at changing a water pump? :)

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Fab Day

Post by Gumby »

Do you already have a pump? I'm not sure because I have never done a pump.... I just swap the entire motor out. I guess if you have issues there will be options for you here.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

Don't have a pump yet but actually have a timing chain set in the back...got it free. Do the parts store chains carry the pumps?

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Fab Day

Post by Gumby »

Yup they do, sometimes it takes a few days depending on the store. Merles here has a wharehouse locally.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

All right, final decision. Jeep is going to play trailer queen tomorrow. ..it's leaking too bad to drive. But at least I still get to play!

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Fab Day

Post by Tad »

See you all in about an hour.
Just need some food and gas stop.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Fab Day

Post by fulsizjeep »

Y'all have a good time now yahear. :-bd
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Fab Day

Post by TUDrewser »

Image

Image

Image

Image

Image

Image

Image
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.

AwesomeJ10
Posts: 3031
Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:

Re: Fab Day

Post by AwesomeJ10 »

Looks like you guys had some fun! :fsj:
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Fab Day

Post by jsinajeep »

I would say we had a good and fun day today. Thanks to you Bob.
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Fab Day

Post by Gumby »

Man I must agree with you Jerry, thanks for hosting us Bob. I got a chance to see some really good peeps, Drew, Tad, Jerry, Casey , Matt, Bob and of course that dude that ditched us :roll: no names for him right now. Lessons were learned today and now I know... nothing is as easy as it is planned to be. Thank you all for being a part of my learning process. It was so much fun.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)

will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Fab Day

Post by will e »

Image

Didn't Bob have that same dance move around the Thanksgiving fire?
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Post Reply