Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
FSJ Related Events in the Mountain Time Zone
Nikkormat
Posts: 3623 Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City
Post
by Nikkormat » Thu Jun 09, 2016 8:00 pm
I'm not sure if I'll make it anymore, I might start a new job on the 18th.
Gabe, "reformed" Jeep hoarder.
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Tue Jun 14, 2016 6:06 am
Just so everyone knows, I am here, so if you see a silver zj with a grey rocket box on top and Az. plates, wave big...
REDONE
Posts: 2678 Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO
Post
by REDONE » Tue Jun 14, 2016 6:52 am
Will do! And I plan to at least stop by and say howdy if the meet and greet still happens next weekend!
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Tue Jun 14, 2016 7:53 am
Rather than having the pre-trail run M@G at the gas station, why not have it at my house in Longmont? I am about 5 miles west of the Interstate at 920 Quartz Ct, Longmont CO 80504 right in town which is 5 miles closer to 'wheeling. I have a big culdesac so plenty of room for parking. I figure we can hang out and chat for a bit, then whomever wants to 'wheel can go. One of the reasons for this is simple: my Honcho has a hole in the oil pan and I can't drive it right now. I will try and pull it out of the backyard and put it into the garage. Who knows - with all the FSJ representation I may weld up the hole and take it 'wheeling.
BRUTUS
Posts: 219 Joined: Wed Jun 18, 2014 8:36 pm
Location: Fort Collins CO
Post
by BRUTUS » Tue Jun 14, 2016 8:27 am
Plenty of parking? LOL
Turns out I have a wedding to go to in Kearney Nebraska this weekend so I can't attend. Sorry Jaber.
'74 J30 with some upgrades
REDONE
Posts: 2678 Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO
Post
by REDONE » Tue Jun 14, 2016 8:28 am
I'm good with Blakes for 9am Saturday if everyone else is!
Brutus, I would use any excuse necessary to NOT go to Kearney Nebraska.
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Tue Jun 14, 2016 9:22 am
BRUTUS wrote: Plenty of parking? LOL
Turns out I have a wedding to go to in Kearney Nebraska this weekend so I can't attend. Sorry Jaber.
Plenty of parking for the crowd we will have!
Too bad you aren't gonna make it Brutus. At least I got to see you the other day. Oh and your little boy. Man, he is cute!!
BRUTUS
Posts: 219 Joined: Wed Jun 18, 2014 8:36 pm
Location: Fort Collins CO
Post
by BRUTUS » Tue Jun 14, 2016 9:36 am
REDONE wrote: Brutus, I would use any excuse necessary to NOT go to Kearney Nebraska.
It is for a fellow FSJ'ers wedding... Mikki Bennett. Otherwise I would tend to agree with you.
Blake wrote: BRUTUS wrote: Plenty of parking? LOL
Turns out I have a wedding to go to in Kearney Nebraska this weekend so I can't attend. Sorry Jaber.
Plenty of parking for the crowd we will have!
Too bad you aren't gonna make it Brutus. At least I got to see you the other day. Oh and your little boy. Man, he is cute!!
Yeah, I wish I could. Garrett is pretty cute if I do say so myself!
'74 J30 with some upgrades
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Tue Jun 14, 2016 7:07 pm
Brutus, the weather out that way is very nasty, be safe!!!
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Tue Jun 14, 2016 7:12 pm
Blake wrote: Rather than having the pre-trail run M@G at the gas station, why not have it at my house in Longmont? I am about 5 miles west of the Interstate at 920 Quartz Ct, Longmont CO 80504 right in town which is 5 miles closer to 'wheeling.
Oh sure, right in the !middle of all that #@%&+# construction I've been stuck in this week....
There are 2 offices across the street from here that will be empty, but don't see a problem with Blake's either.
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Wed Jun 15, 2016 12:25 pm
so who all is planning to show up?
and are we planning to 'wheel? If we are planning to 'wheel (and we should) then I need to weld my oil pan...
REDONE
Posts: 2678 Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO
Post
by REDONE » Wed Jun 15, 2016 12:41 pm
I plan to say "hi" real quick and then jam home to get back to wrenching on my own junk.
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
derf
Posts: 1403 Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:
Post
by derf » Wed Jun 15, 2016 12:41 pm
I have 3 different things to attend all overlapping on that day. I'm going to have to bow out for the meet up this time.
W0JPR
Check out my
gear ratio calculator
If you can't fix it with a hammer or duct tape you have an electrical problem.
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Wed Jun 15, 2016 3:33 pm
I'm not wheeling, after the meet, we are going to meander down to Cripple Creek and see the sights...
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Wed Jun 15, 2016 4:09 pm
I'd be OK with moving it up to Fri night if that helps anyone....
REDONE
Posts: 2678 Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO
Post
by REDONE » Wed Jun 15, 2016 4:39 pm
When ever it happens I plan to make an appearance (except Sunday, I'm not Catholic but my wife is, and i get to spend my first father's day as an actual father in baptism classes for my daughter).
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Thu Jun 16, 2016 7:53 am
Friday night would be good. Maybe even better.
I'm in the middle of working on my LX450. I've removed all the doors/hood/fenders/carpets/etc and slapping a cage on it.
Topic author
jaber
Vendor
Posts: 3067 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Thu Jun 16, 2016 9:16 am
Just thought it would make it easier for the guys that have other obligations on Saturday...
derf
Posts: 1403 Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:
Post
by derf » Thu Jun 16, 2016 2:13 pm
I might could do Friday evening.
W0JPR
Check out my
gear ratio calculator
If you can't fix it with a hammer or duct tape you have an electrical problem.
REDONE
Posts: 2678 Joined: Tue Sep 13, 2011 5:48 pm
Location: Lakewood and Bailey, CO
Post
by REDONE » Thu Jun 16, 2016 2:27 pm
Haha! Blake, I found your place on google maps. Google street view blurred out the lamp post at the end of your driveway, just how ugly is it?
I was making sure I was putting it in the directions right by seeing if the Honcho was visible. Totally is. It's street view fabulous.
79 J-10 (Honcho Mucho) KE0LSU
304/Performance Fuel Injection TBI/MTA1/SP2P/Magnum rockers
T18/D20/D44s&4.10s/33" Mud Claws
Grizzly Locker Rear
4" front spring drop, 5" rear shackle flip
Chevy style HEI (ECM controlled)
Dolphin "Shark" gauges in a fancy homemade oak bezel
3/4 resto, rotting faster than I've been fixing it.