Stock tank and sender ok for diesel?

For everything related to converting and up keeping diesel engines in an FSJ
Billybob535
Posts: 13
Joined: Mon Dec 25, 2017 5:44 am

Stock tank and sender ok for diesel?

Postby Billybob535 » Thu Mar 22, 2018 7:09 pm

I am collecting parts to build a 76-83 4 door narrow track waggy or cherokee with an OM606 turbo diesel, NV4500, and NP208. I was discussing this with someone and they questioned if the stock gas tank and sender would be ok with diesel.

Anyone here who has converted to diesel have any issues using the stock tank and sending unit?

I know I will have to drain all the gas and I plan to replace all rubber lines. Anything else to know?

Thanks

Adventure_Wagon88
Posts: 402
Joined: Tue Sep 06, 2016 2:00 pm
Location: Leesport, PA
Contact:

Re: Stock tank and sender ok for diesel?

Postby Adventure_Wagon88 » Thu Apr 12, 2018 7:08 am

Are you using a poly tank or metal? A galvanized tank is no good for diesel. A carbon steel tank is fine but I wouldn't want one. Not sure if any of the old tanks were galvanized inside or not. Keep in mind that diesel gets quite frothy when agitated, so that could be a concern if your return line creates a lot of splashing. I am building a diesel wagoneer and installing a tank in the spare tire area, ditching the stock tank. My material choice will be Stainless, Aluminum, or Poly, in that order. I will most likely use a late model XJ poly tank to start and see how that works for me. Then I will either buy a nice Genright Offroad extended range XJ tank, or build my own out of Stainless or Aluminum. Lines and fittings will of course be all Stainless, and rated for diesel fuel on the flexible bits.

User avatar
Stuka
Site Admin
Posts: 8201
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Stock tank and sender ok for diesel?

Postby Stuka » Thu Apr 12, 2018 7:20 am

If your chassis is an 80+, it will have a poly tank stock, and that should work fine. And I am not sure if the stock tank is galvanized or not. Mine never had any rust on them, but then I also live in california.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

Billybob535
Posts: 13
Joined: Mon Dec 25, 2017 5:44 am

Re: Stock tank and sender ok for diesel?

Postby Billybob535 » Fri Apr 13, 2018 5:13 am

Stuka wrote:If your chassis is an 80+, it will have a poly tank stock, and that should work fine.


Can the 80-83 poly tank be easily swapped into a 76-79?

User avatar
Stuka
Site Admin
Posts: 8201
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Stock tank and sender ok for diesel?

Postby Stuka » Fri Apr 13, 2018 9:40 am

It can be swapped in. But the mounts are all different.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ


Return to “FSJ Diesel Conversions”

Who is online

Users browsing this forum: No registered users and 2 guests