New 3/8” feed line

For everything related to using Fuel Injection in an FSJ.
Post Reply

Topic author
SkylinePCG
Posts: 72
Joined: Tue Apr 16, 2013 11:28 am

New 3/8” feed line

Post by SkylinePCG »

When the weather breaks, I’m hoping to get the fuel pump and new feed line mounted to the Cherokee’s frame. I was all set to use Nicopp, which read great as far as durability and ease of bending and installation.

But then I saw this “vapor guard” hose, and even trough it costs more, I like that it doesn’t leave the ends to be a length of rubber-especially at the gas tank side.

Anyone have any experience with this stuff or care to comment?

https://www.holley.com/products/plumbin ... uard_hose/
User avatar

Renodemona
Posts: 917
Joined: Wed Jan 01, 2014 9:55 pm
Location: Sparks, NV

Re: New 3/8” feed line

Post by Renodemona »

Can get the same thing from Summit in numerous AN sizes and some pipe fitting sizes, they are just connectors from what it looks like. I've been running rubber hose with both frame mounted and in tank mounted pumps for 4ish years with no issues.
https://www.amazon.com/Gates-27341-Barr ... 199&sr=8-6
Various Summit AN connectors and FI hose clamps. I don't have any personal experience with Holley stuff, so maybe its better, maybe not but it looks like the same kind of stuff you can get other places to me. Same dimentions, same PSI rating, same color braiding. And as for having to use Holley connectors...They are all the same dimensions (that's kind of the point lol).
"Wait, what's on fire!?" KJ7TCT
--------------------------------------------------------------
1976 Cherokee w/t 'Susan' 401/TH400/QT(PT)
FiTech Go EFI, Edelbrock Performer intake
3" Rough Country Springs, HEI Dizzy
-------------------------------------------------------------
2018 Cherokee Trailhawk V6 'Sedna'
Post Reply