Full Size Jeep Network

I’m in the process of installing VSS to my current fuel only setup. I found out today that I’m missing wire to terminal A10 in my harness. How do I go about getting hold of terminal pin so I can add wire to A10? I would appreciate the info.

ferrum wrote:I’m in the process of installing VSS to my current fuel only setup. I found out today that I’m missing wire to terminal A10 in my harness. How do I go about getting hold of terminal pin so I can add wire to A10? I would appreciate the info.

pep boys carries them or can order online from many diff. places.
if you aren’t in hurry I could drop a few pigtails in mail

you don’t have spare pin/wire you could move & reuse?

I ordered mine off eBay when I redone my connectors on my ecm. I still have a few of them. I can send you some if you need me to.

Sent from my SAMSUNG-SM-G891A using Tapatalk

babywag wrote: pep boys carries them or can order online from many diff. places.
if you aren’t in hurry I could drop a few pigtails in mail

you don’t have spare pin/wire you could move & reuse?

I didn’t even think of that as an option. I’m not using AC compressor as I don’t have AC. I think I found the connector pins I was looking for on mouser site this morning. If they are not the correct ones, I will try relocating AC wire. If that fails, may take up on your offer. Thanks for the suggestion.

toothofwar wrote:I ordered mine off eBay when I redone my connectors on my ecm. I still have a few of them. I can send you some if you need me to.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Thank you for the offer. If my purchase fails I will let you know.

Thank you babwag for the suggestion. I was able to relocate compressor status to A10 pin for the VSS. I now have VSS and IAC is working much better.

Once I figure out how to get photos, I will put them up.

Pins I ordered from Mouser were correct. I now have 25 spare pins.