Billet Aluminum FSJ parts

User avatar
DustinLangston
Posts: 532
Joined: Fri Jun 14, 2013 8:03 pm
Location: Cedar City Utah

Re: Billet Aluminum FSJ parts

Postby DustinLangston » Fri Apr 29, 2016 8:29 am

Has anyone had any troubles with the door lock pulls? Mine are not threading on (feels cross threaded). Did they make different threaded door lock rods over the years? I tried several of them, on several FSJ's and none of them feel threaded. Let me know if anyone else has had this issue. Thanks.
1982 Wagoneer Limited 5.3L Vortec 4L60E swap - finished/restored - sold - bought back - sold again
1979 Wagoneer 360 TH400 1339 QT - built into perfect daily driver - sold
1981 J10 Sportside Honcho - finished/restored - sold
1979 Cherokee Golden Eagle - 5.3L Vortec 6L80E swap - finished/restored - sold
1967 Super Wagoneer - sold, too much work
1978 J10 Golden Eagle - finished/restored - sold
1962 Rambler Classic Cross Country Wagon - current project, wife's daily driver - she'll never let me sell it

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Fri Apr 29, 2016 8:57 am

DustinLangston wrote:Has anyone had any troubles with the door lock pulls? Mine are not threading on (feels cross threaded). Did they make different threaded door lock rods over the years? I tried several of them, on several FSJ's and none of them feel threaded. Let me know if anyone else has had this issue. Thanks.


The few times we have had this issue it was the threads on the threaded rod being messed up. The original plastic door lock pulls would just form to the threads. The aluminum lock pulls will not. You might try chasing the threads on your threaded rod, or grinding off the first few threads. If you continue to have problems, please let me know.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

sfriend
Posts: 4
Joined: Mon Jan 04, 2016 4:54 pm

Re: Billet Aluminum FSJ parts

Postby sfriend » Mon May 09, 2016 8:37 am

I sent you a message a few weeks ago about wanting to purchase the billet mirror mounts and what mirrors I should buy. Would you look for and reply.
Thanks in advance
Steve Friend

Xplitive
Posts: 118
Joined: Wed Sep 16, 2015 3:50 am
Location: York County, VA

Re: Billet Aluminum FSJ parts

Postby Xplitive » Tue May 10, 2016 7:00 pm

Best modification to date! I can make lane changes a lot safer now for everyone with the new side mirrors. Excellent workmanship and quick shipping. Overall investment was well worth it. Search my posts for mirrors, found them through another member.

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Wed May 11, 2016 7:17 am

sfriend wrote:I sent you a message a few weeks ago about wanting to purchase the billet mirror mounts and what mirrors I should buy. Would you look for and reply.
Thanks in advance
Steve Friend


Steve, I just sent you an e-mail. Let me know if you get it.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
msh227
Posts: 281
Joined: Thu Mar 21, 2013 10:55 am
Location: Poconos, PA

Re: Billet Aluminum FSJ parts

Postby msh227 » Wed May 11, 2016 5:58 pm

Subscribed for future use. Nice looking product. I need to upgrade my mirrors.


Sent from my iPhone using Tapatalk
Matt

1978 J10 5.3L/700r4/QT swap in progress.....

37x14.50R15 TOYO Open Country MT
4.56 Gears
6" BJs springs w/ BJs offroad shackles in front & 2" blocks in rear to level.
3" body lift

Build Thread:
viewtopic.php?f=12&t=2300

User avatar
glake
Posts: 175
Joined: Mon Feb 09, 2015 9:57 pm
Location: Escondido, CA

Re: Billet Aluminum FSJ parts

Postby glake » Wed Aug 03, 2016 7:45 am

What size thread are on the door lock pulls? I need a set for my 70 Gladiator 8-32 thread.
1970 Jeep Gladiator: Daily Driver!
1963 Jeep Wagoneer: In progess
1972 Jeep Wagoneer: waiting in the wings

User avatar
DustinLangston
Posts: 532
Joined: Fri Jun 14, 2013 8:03 pm
Location: Cedar City Utah

Re: Billet Aluminum FSJ parts

Postby DustinLangston » Fri Aug 05, 2016 9:46 am

ross80truck wrote:
DustinLangston wrote:Has anyone had any troubles with the door lock pulls? Mine are not threading on (feels cross threaded). Did they make different threaded door lock rods over the years? I tried several of them, on several FSJ's and none of them feel threaded. Let me know if anyone else has had this issue. Thanks.


The few times we have had this issue it was the threads on the threaded rod being messed up. The original plastic door lock pulls would just form to the threads. The aluminum lock pulls will not. You might try chasing the threads on your threaded rod, or grinding off the first few threads. If you continue to have problems, please let me know.



I wanted to revisit this and let everyone know that these lock pulls worked out great! I chased the threads and the new pulls went right on. They look great!
1982 Wagoneer Limited 5.3L Vortec 4L60E swap - finished/restored - sold - bought back - sold again
1979 Wagoneer 360 TH400 1339 QT - built into perfect daily driver - sold
1981 J10 Sportside Honcho - finished/restored - sold
1979 Cherokee Golden Eagle - 5.3L Vortec 6L80E swap - finished/restored - sold
1967 Super Wagoneer - sold, too much work
1978 J10 Golden Eagle - finished/restored - sold
1962 Rambler Classic Cross Country Wagon - current project, wife's daily driver - she'll never let me sell it

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Tue Aug 16, 2016 9:35 am

glake wrote:What size thread are on the door lock pulls? I need a set for my 70 Gladiator 8-32 thread.

Yes, they are 8-32.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

ShagWagon
Posts: 601
Joined: Tue Apr 19, 2016 8:13 pm

Re: Billet Aluminum FSJ parts

Postby ShagWagon » Thu Aug 25, 2016 8:33 am

I'll take a set of 4 with the AMC logo.

I can do PayPal or send a company check..
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.

RamJetFSJ
Posts: 267
Joined: Fri Mar 22, 2013 12:36 pm
Location: Carpinteria, CA

Re: Billet Aluminum FSJ parts

Postby RamJetFSJ » Thu Aug 25, 2016 11:12 am

ross80truck, can you PM me w/ the info on the mirrors your mounts use? I want to see whats available before deciding on the mounts. Thanks!
80 Wag in 73 attire, Ram Jet 350 power

ShagWagon
Posts: 601
Joined: Tue Apr 19, 2016 8:13 pm

Re: Billet Aluminum FSJ parts

Postby ShagWagon » Wed Sep 07, 2016 8:48 am

I sent this guy $33 about 10 days ago for some door locks and haven't heard word from him since then. Took less than 24 hours for him to get me the PayPal address for payment though.

Won't reply to my pms.... Last one sent Thursday still no word.
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.

User avatar
DustinLangston
Posts: 532
Joined: Fri Jun 14, 2013 8:03 pm
Location: Cedar City Utah

Re: Billet Aluminum FSJ parts

Postby DustinLangston » Wed Sep 07, 2016 9:19 am

I hope he's ok. He has always been fast to respond and ship.
1982 Wagoneer Limited 5.3L Vortec 4L60E swap - finished/restored - sold - bought back - sold again
1979 Wagoneer 360 TH400 1339 QT - built into perfect daily driver - sold
1981 J10 Sportside Honcho - finished/restored - sold
1979 Cherokee Golden Eagle - 5.3L Vortec 6L80E swap - finished/restored - sold
1967 Super Wagoneer - sold, too much work
1978 J10 Golden Eagle - finished/restored - sold
1962 Rambler Classic Cross Country Wagon - current project, wife's daily driver - she'll never let me sell it

ShagWagon
Posts: 601
Joined: Tue Apr 19, 2016 8:13 pm

Re: Billet Aluminum FSJ parts

Postby ShagWagon » Wed Sep 07, 2016 9:28 am

Hope so.

I just don't like paying someone for something, then having no communications that they got the money or product is on the way, or gonna take a while to make, or something......
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.

GaJeep94YJ
Posts: 313
Joined: Fri Dec 18, 2015 12:00 pm

Re: Billet Aluminum FSJ parts

Postby GaJeep94YJ » Wed Sep 07, 2016 6:47 pm

I sent him a message from another location to check this thread.

Most likely he just over looked it?

Sent from my Nexus 5 using Tapatalk

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Wed Sep 07, 2016 8:16 pm

ShagWagon wrote:I sent this guy $33 about 10 days ago for some door locks and haven't heard word from him since then. Took less than 24 hours for him to get me the PayPal address for payment though.

Won't reply to my pms.... Last one sent Thursday still no word.


Sorry about that. I am not sure what happened. I have not received any of your PMs and I did not see any notifications from PayPal in my e-mail for a received payment. Thankfully Steve let me know on Facebook you were trying to contact me. I will check PayPal in the morning and should be able to ship your door locks out before the weekend. Again, I am sorry this got overlooked. Not sure what all happened. If you don't mind, shoot me a PM again.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Wed Sep 07, 2016 8:26 pm

Found part of the problem, had to many PMs and my folder would not allow me to receive anymore. Cleared some old ones out and that problem is solved now. Now to find out why PayPal is not sending me notifications.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

GaJeep94YJ
Posts: 313
Joined: Fri Dec 18, 2015 12:00 pm

Re: Billet Aluminum FSJ parts

Postby GaJeep94YJ » Thu Sep 08, 2016 4:48 am

Steve? Lol

Sent from my Nexus 5 using Tapatalk

User avatar
ross80truck
Vendor
Posts: 400
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Thu Sep 08, 2016 4:58 am

GaJeep94YJ wrote:Steve? Lol

Sent from my Nexus 5 using Tapatalk


Sorry Seth. I am going to blame that mistake on it being late last night.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

ShagWagon
Posts: 601
Joined: Tue Apr 19, 2016 8:13 pm

Re: Billet Aluminum FSJ parts

Postby ShagWagon » Thu Sep 08, 2016 6:54 am

ross80truck wrote:
ShagWagon wrote:I sent this guy $33 about 10 days ago for some door locks and haven't heard word from him since then. Took less than 24 hours for him to get me the PayPal address for payment though.

Won't reply to my pms.... Last one sent Thursday still no word.


Sorry about that. I am not sure what happened. I have not received any of your PMs and I did not see any notifications from PayPal in my e-mail for a received payment. Thankfully Steve let me know on Facebook you were trying to contact me. I will check PayPal in the morning and should be able to ship your door locks out before the weekend. Again, I am sorry this got overlooked. Not sure what all happened. If you don't mind, shoot me a PM again.


Funds were sent on the 28th. Just confirmed it if that helps you track it down.

Then I pm through the forum on Thursday to ask if you had received it okay.

All said was successfully sent. Waited through the holiday weekend plus a day for any reply.

Np as long as we're on track now... Keep in touch.
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.


Return to “Vendors”

Who is online

Users browsing this forum: No registered users and 1 guest