Billet Aluminum FSJ parts

User avatar
Jeff from Iowa
Posts: 172
Joined: Wed Dec 18, 2013 9:08 pm
Location: Iowa
Contact:

Re: Billet Aluminum FSJ parts

Postby Jeff from Iowa » Fri Mar 04, 2016 8:16 pm

Thanks, Ill have to look around and see if ours has only 3 wires if so you would think it wouldn't be too hard.
90 Fsj. 5.3, 4l65,241. 4" lift, Custom valved Bilstien 5125 Shocks, Dakota Digital Dash, Bjs Radiator, Bjs aluminum tank,Viper remote start, power door locks, one touch rear window. Ac, Cruise, tow haul all work as they should. Fully restored oem wheels.

68 Jeepster Rock Crawler. Atlas, Ori, Spider Trax, High Nine, Arb, Grizzly Locker. Schwanke 5.3 410hp/434tq.

2014 Ford Raptor Supercab, daily driver.

IMCA modified #66

User avatar
ProTouring442
Posts: 597
Joined: Sat Mar 23, 2013 10:28 am
Location: Harriman, Tennessee
Contact:

Re: Billet Aluminum FSJ parts

Postby ProTouring442 » Sat Mar 05, 2016 6:10 am

Jeff from Iowa wrote:Thanks, Ill have to look around and see if ours has only 3 wires if so you would think it wouldn't be too hard.


Yes, both the van mirrors and the FSJ mirrors are three wire.

mattparliament
Posts: 12
Joined: Sat Jun 09, 2012 9:25 am

Re: Billet Aluminum FSJ parts

Postby mattparliament » Wed Mar 09, 2016 8:37 am

went and took my mirror off, upon inspection it looks like it should cover the holes. Going to hit the hardware store and find some screws and hopefully get to them this weekend.
Image

mattparliament
Posts: 12
Joined: Sat Jun 09, 2012 9:25 am

Re: Billet Aluminum FSJ parts

Postby mattparliament » Wed Mar 09, 2016 4:27 pm

are you guys using sheet metal screws or bolting them on with lockwashers and nuts???

maineguide
Posts: 3
Joined: Sat May 09, 2015 8:55 pm

Re: Billet Aluminum FSJ parts

Postby maineguide » Wed Mar 09, 2016 6:59 pm

will chevy mirror work in the mirror base's

maineguide
Posts: 3
Joined: Sat May 09, 2015 8:55 pm

Re: Billet Aluminum FSJ parts

Postby maineguide » Wed Mar 09, 2016 7:02 pm

will chevy mirror work in the mirror base's

maineguide
Posts: 3
Joined: Sat May 09, 2015 8:55 pm

Re: Billet Aluminum FSJ parts

Postby maineguide » Wed Mar 09, 2016 7:37 pm

How do i order from you i would like to get the mirror mounts and door lock pulls

User avatar
ross80truck
Vendor
Posts: 398
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Thu Mar 10, 2016 8:05 am

mattparliament wrote:are you guys using sheet metal screws or bolting them on with lockwashers and nuts???


I have always used sheet metal screws. But bolting them in with a washer and lock washer on the back side would actually be more secure.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
ross80truck
Vendor
Posts: 398
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Thu Mar 10, 2016 8:07 am

maineguide wrote:will chevy mirror work in the mirror base's


I looked at chevy mirrors off a mid 80s chevy truck when I was designing these. They will work, but they move the mirror closer in and raise it up quite a bit. If you have a way to cut the tube that mounts the mirror shorter, than yes you could use a Chevy mirror and make them look right. Otherwise they will sit way to high in my opinion.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
MadMax78
Posts: 410
Joined: Tue Mar 26, 2013 12:40 pm
Location: Little Rock, AR

Re: Billet Aluminum FSJ parts

Postby MadMax78 » Sat Mar 12, 2016 1:05 am

Ross, the glove box pull and sun visor cups look and work awesome!! I'll post pics asap. Thanks again. :-bd :-bd

Edit: Still waiting on the glove box pull pic to pop up in photobucket

Image

Image
Last edited by MadMax78 on Sun Mar 13, 2016 8:00 pm, edited 1 time in total.
MadMax78

78 Cherokee S, Wide Track, 360, TH400, Quadra Trac, TAD's SOA, 35" BFG KM2, Edelbrock Carb & Intake, MSD Coil & Ignition

stevenwinslow
Posts: 27
Joined: Wed Feb 17, 2016 4:54 pm

Re: Billet Aluminum FSJ parts

Postby stevenwinslow » Sun Mar 13, 2016 2:23 pm

Ross, did you get my PM concerning PayPal payment?

User avatar
ross80truck
Vendor
Posts: 398
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Mon Mar 14, 2016 5:26 am

stevenwinslow wrote:Ross, did you get my PM concerning PayPal payment?


Steven, I received payment and your parts will ship today. Than you.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
ross80truck
Vendor
Posts: 398
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Mon Mar 14, 2016 5:27 am

MadMax78 wrote:Ross, the glove box pull and sun visor cups look and work awesome!! I'll post pics asap. Thanks again. :-bd :-bd

Edit: Still waiting on the glove box pull pic to pop up in photobucket

Image

Image



That is awesome! Thank you for posting pics. I really appreciate it.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

mattparliament
Posts: 12
Joined: Sat Jun 09, 2012 9:25 am

Re: Billet Aluminum FSJ parts

Postby mattparliament » Sun Mar 20, 2016 3:54 pm

installed! Got lucky and they covered the holes. Sealed them up and good to go! Used sheet metal screws, if they don't hold I'll pull the door panels and bolt them on with a plate on the inside as well. Thanks Ross!

old holes and newly drilled ones low
Image
Image
Image
Image

csuengr
Posts: 1248
Joined: Sun Mar 24, 2013 10:24 am
Location: Sterling, CO

Re: Billet Aluminum FSJ parts

Postby csuengr » Sun Mar 20, 2016 7:06 pm

I want to order a pair of the mirror mounts. How do I go about it?
1977 Cherokee S, Ford 5.0, 5 speed, BW 1356, 33 x 10.50 BFG's. My DD and only vehicle.

User avatar
ross80truck
Vendor
Posts: 398
Joined: Tue Mar 26, 2013 8:30 am
Location: Temple, TX

Re: Billet Aluminum FSJ parts

Postby ross80truck » Mon Mar 21, 2016 1:30 pm

csuengr wrote:I want to order a pair of the mirror mounts. How do I go about it?


Shoot me a PM. I usually take payment through paypal.
Priorities
1. God
2. Wife ( Sarah )
3. Children ( Lane & Dirk )
4. Work
5. Jeep

Man it is hard to keep them in the right order!

85 Wagoneer, 6bt, NV4500, Black Box, NP205, D60 front, Corp 14 rear http://fsjnetwork.com/forum/viewtopic.php?f=36&t=1446
76 Cherokee Chief - Cheap Build - SOLD http://fsjnetwork.com/forum/viewtopic.php?f=12&t=2605
81 Jeep Scrambler viewtopic.php?f=12&t=8769&p=97301#p97301

User avatar
jpswapmohn
Posts: 376
Joined: Sun Mar 02, 2014 6:08 pm
Location: Ft. Bragg, NC

Re: Billet Aluminum FSJ parts

Postby jpswapmohn » Tue Mar 22, 2016 7:18 pm

mattparliament wrote:installed! Got lucky and they covered the holes. Sealed them up and good to go! Used sheet metal screws, if they don't hold I'll pull the door panels and bolt them on with a plate on the inside as well. Thanks Ross!


That is a lot of weight pulling outward on sheet metal screws in the thin skin of the door. 75mph against those nice big mirrors is going to fatigue the sheet metal pretty quickly, I would think. It sure looks nice, I would hate for you to lose one out on the interstate. A plate and some bolts/nuts would be a good idea, IMHO.
One day I will wake up and realize that my jeep is complete...one day, I just know it.
88Wag, LT1/4L60E/NP242, etc.
95YJ, STaK, D44's, SOA, ARB's, Bilstein 5150s, 35" KM2's
50 CJ3A
77 J-10 (sold)

mattparliament
Posts: 12
Joined: Sat Jun 09, 2012 9:25 am

Re: Billet Aluminum FSJ parts

Postby mattparliament » Tue Mar 22, 2016 7:46 pm

agreed....

Bonnie
Posts: 5
Joined: Sat Apr 23, 2016 11:52 am
Location: Florida
Contact:

Re: Billet Aluminum FSJ parts

Postby Bonnie » Thu Apr 28, 2016 3:49 pm

PM sent. Your work is awesome.

blacklabel33
Posts: 1
Joined: Wed Apr 27, 2016 3:21 pm

Re: Billet Aluminum FSJ parts

Postby blacklabel33 » Fri Apr 29, 2016 6:50 am

pm sent


Return to “Vendors”

Who is online

Users browsing this forum: No registered users and 1 guest