Just for fun I bought one of the Chinese knock off to compare. There are 2 different Kinds. I made up y mind if they were compatible I would quit making these I have built over 400 of these now in more than 30 configurations. Both were inferior & without warrantee or any tech support. I'll keep on making mine because them Chinese knock offs are exactly what I expected. I'll be making mine for a while yet.
So for the ones that have asked.
The relays do not compare with mine.
The relay plugs do not compare. My wire is a size bigger & all high amperage connections are soldered.
Mine are also taped with electrical tape instead of the plastic crap that disintegrates in 6 months.
you can pull the wires right out from under the crimped light sockets & relay sockets.
the crimp lugs are not of good quality.
Their unit is fused mine have a automatic resetting breaker.
It's true you get what you pay for. getting what you don't pay for make the difference.
there's a few other differences but these are the ones that will control life & function.
Thanks to everyone that has bought on. I never was in them for the money.
In the over 400 I've built I've warrantied one & when it was returned it was clear it wasn't a defect that cause the issue. so that's pretty a good record.
I'll put mine up against any of them. Even the 125 dollar ones.
1980 Honcho 258 4 speed mostly stock with 4 " lift.
You know the rude dude from IFSJA
1980 Cherokee wrangled & mangled
MSD complete system
Comp cam 270H
Ramsey 12K winch
Built to drive not sit in the garage.
No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?