ABS, panels for wagoneer, J truck, Commando, Jeepster

User avatar
men in black
Vendor
Posts: 66
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

ABS, panels for wagoneer, J truck, Commando, Jeepster

Postby men in black » Tue Mar 26, 2013 7:41 am

I can make all interior panels, front, rear doors, cargo, tailgate and kickpanels

1/8" Black ABS

Door and Cargo panels $45.00 each
Tailgate panel $65.00
Kickpanels are $25.00 a pair.

Three piece headliner for J trucks $130.00


Price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

Plus shipping


Panels with power locks/window switch cutout, later model speaker hole.

Image

Image

Image

Image


J Truck three piece headliner replacement panels out of ABS. $130.00

Image

Image

Jeepster kickpanels $40.00 pair

Image

ABS covered and installed in CU4WLN yellow Cherokee

Image

Image

Image

Image


Commando ABS door panels $60.00 a pair

Image
Last edited by men in black on Fri Jul 14, 2017 7:00 am, edited 19 times in total.
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

User avatar
jaber
Vendor
Posts: 2973
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby jaber » Thu Mar 28, 2013 5:12 am

THANK YOU!!!!
Last edited by jaber on Sat Apr 16, 2016 6:29 pm, edited 1 time in total.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

User avatar
wewillsurvive
Posts: 1086
Joined: Mon Mar 18, 2013 1:10 pm
Location: Martinsville, IN

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby wewillsurvive » Fri Mar 29, 2013 5:47 am

I am going to get a list of stuff I want replaced together and hit you up. These are awesome, unlike the stock nastiness I have in my new 86 GW.
1972 Dodge Demon with a 451" stroker Big Block
1986 Jeep Grand Wagoneer AMC 360" AKA Golddigger- SOLD
2003 Dodge Crewcab 2500 Cummins longbed 4x4
2011 Jeep Grand Cherokee V-6 full time 4x4


Alternators, winches, 4x4, guns all have the same issue if you don't have any knowledge of them usually bad things will happen. Serehill

serehill
Vendor
Posts: 1953
Joined: Sun Nov 20, 2011 4:00 pm
Location: Mesquite Texas

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby serehill » Fri Jun 14, 2013 4:21 pm

I have 2 sets of the Pie plate light bezels they ROCK. :-bd
1980 Honcho 258 4 speed mostly stock with 4 " lift.

WIP

You know the rude dude from IFSJA


1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.


No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?

User avatar
carnuck
Posts: 3807
Joined: Sun Mar 04, 2012 2:48 pm
Location: Lynnwood, WA
Contact:

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby carnuck » Mon Jun 17, 2013 1:29 pm

boy do I need a job or $ell something so I can buy more stuff for my truck!
GETTING READY TO MOVE FINAL SALE!

http://tinyurl.com/jimsclads

Honcho rebuild thread http://www.fsjnetwork.com/forum/viewtopic.php?f=15&t=2652

Full Size Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

User avatar
Atla
Posts: 303
Joined: Tue Jul 31, 2012 6:47 am
Location: North Carolina

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby Atla » Mon Jul 01, 2013 9:23 pm

That is some outstanding looking stuff!
~Atla. (I'm just here for the pictures)
1983 J-10
2001 TJ

My Build Thread - viewtopic.php?f=12&t=2722

loche451
Posts: 7
Joined: Fri Sep 27, 2013 5:45 pm

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby loche451 » Fri Sep 27, 2013 5:47 pm

I would like to buy some parts...pm sent

User avatar
VAGJunkie
Posts: 74
Joined: Tue Oct 29, 2013 9:10 am
Location: Blount, WV

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby VAGJunkie » Sun Nov 10, 2013 10:00 pm

Headliner boards for 86 wagoneer? Price and shipping to 25306
86 Grand Wagoneer
360, 727, 228
"400 Bucks"

69gladiator
Posts: 159
Joined: Tue Oct 15, 2013 6:10 pm
Location: stratford,ct

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby 69gladiator » Sun Feb 16, 2014 8:44 pm

Do you have photos of the installed J Truck headliners?

tripowergto
Posts: 6
Joined: Sun Apr 06, 2014 3:06 pm

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby tripowergto » Fri Apr 18, 2014 6:46 pm

Are you still selling the diamond plate door panels?

NOLA88Wagoneer
Posts: 35
Joined: Thu Apr 11, 2013 4:54 pm
Location: New Orleans, LA

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby NOLA88Wagoneer » Tue May 20, 2014 5:47 am

Are you able to make rocker panels for the bed of a J-Truck?

serehill
Vendor
Posts: 1953
Joined: Sun Nov 20, 2011 4:00 pm
Location: Mesquite Texas

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby serehill » Mon Aug 04, 2014 7:49 pm

MIB I spoke with you a while back & am still interested. Will your J10 headliner fit the 1980 browed truck mine looks like 4 pieces.
1980 Honcho 258 4 speed mostly stock with 4 " lift.

WIP

You know the rude dude from IFSJA


1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.


No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?

User avatar
men in black
Vendor
Posts: 66
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby men in black » Fri Aug 15, 2014 7:03 am

PM sent
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

User avatar
ClovisMan
Posts: 346
Joined: Fri May 11, 2012 8:10 am
Location: New Braunfels, TX

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby ClovisMan » Wed Aug 20, 2014 6:52 pm

How much is a complete set of the black ABS for a 1988 Grand Wagoneer with all the factory power cut-outs? 2 kickpanels, 4 foor panels, and 2 rear cargo panels?
88 Grand Wagoneer - The Money Pit - 360/727/NP208 - SOA/SF - Lots of other stuff SOLD
78 Cherokee Chief - Copper - 360/TH400/Quadratrac - 4 inch BDS lift - 33 inch tires SOLD

Archangel
Posts: 25
Joined: Thu Aug 21, 2014 3:59 am
Location: Monroe, NC

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby Archangel » Fri Aug 29, 2014 5:59 pm

The kicker panels you're talking about are the ones down by the floor up front? Do you make that in black diamond plate?
1990 Jeep Wagoneer: Running

2" BJ's body lift, 1.5" Rusty's AAL (in progress), K&N air filter,
31x10.50.15 BFG KM2 tires, Duplicolor Bed Armor, Bottom end gaskets (in progress)

On the horizon: Tint, Music System, Custom bumpers

User avatar
men in black
Vendor
Posts: 66
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby men in black » Mon Sep 01, 2014 7:22 am

ClovisMan wrote:How much is a complete set of the black ABS for a 1988 Grand Wagoneer with all the factory power cut-outs? 2 kickpanels, 4 foor panels, and 2 rear cargo panels?
PM sent

Archangel wrote:The kicker panels you're talking about are the ones down by the floor up front? Do you make that in black diamond plate?


Yes there under the dash in front of the doors.
I make a gray plastic diamond plate that can be painted.( forth photo down)
Or a black rubber diamond plate with felt on the back.
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

Archangel
Posts: 25
Joined: Thu Aug 21, 2014 3:59 am
Location: Monroe, NC

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby Archangel » Mon Sep 01, 2014 12:03 pm

men in black wrote:
ClovisMan wrote:How much is a complete set of the black ABS for a 1988 Grand Wagoneer with all the factory power cut-outs? 2 kickpanels, 4 foor panels, and 2 rear cargo panels?
PM sent

Archangel wrote:The kicker panels you're talking about are the ones down by the floor up front? Do you make that in black diamond plate?


Yes there under the dash in front of the doors.
I make a gray plastic diamond plate that can be painted.( forth photo down)
Or a black rubber diamond plate with felt on the back.


How much for the gray plastic diamond plate?
1990 Jeep Wagoneer: Running

2" BJ's body lift, 1.5" Rusty's AAL (in progress), K&N air filter,
31x10.50.15 BFG KM2 tires, Duplicolor Bed Armor, Bottom end gaskets (in progress)

On the horizon: Tint, Music System, Custom bumpers

User avatar
men in black
Vendor
Posts: 66
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby men in black » Tue Sep 02, 2014 7:38 am

Same price $20.00 a pair
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

Rhodesca
Posts: 18
Joined: Mon Oct 20, 2014 10:24 am
Location: Camp Lejeune, NC

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby Rhodesca » Mon Dec 22, 2014 10:52 am

I have a 1978 Jeep J20 and would like your headliner, kickpanels, and door panels with armrest, stock speaker cutout, and electric window and door lock cutouts. How much for all in ABS plastic for those and shipped to 92672? and do you accept paypal?
1978 Jeep J20 frame off rebuild in progress.

User avatar
men in black
Vendor
Posts: 66
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS,alum diam plate panels for wagoneer, J trucks

Postby men in black » Thu Jan 01, 2015 8:42 am

PM sent
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged


Return to “Vendors”

Who is online

Users browsing this forum: No registered users and 3 guests