Tatsadasayago wrote:Q8y_drifter wrote:The backer boards on all my stock panels are badly warped. Has anyone successfully wrapped their factory vinyl/carpet on these ABS panels? Is that even possible? I'd like to keep the stock finish but use a sturdier pre-cut ABS base for em. Any input appreciated.
It has been done with success but often the results aren't so good.
The OEM vinyl and scrim get dry and brittle over the years and often tear or crack when removing from the original backing board.
I'm actually in the process of doing this right now and bought panels from MIB. you do have to start with good quality original vinyl.