Page 2 of 2

Re: Hams at Ouray

Posted: Wed Jul 12, 2017 4:59 pm
by derf
So, now that I'm not bringing my truck, I'm falling back on my little Baofeng. It'll work with the factory antenna but I'd like to use a mag mount. I bough one but I bought the wrong adapter so it won't plug in to the radio. :(

I'm leaving on Friday so I don't have time to get the right adapter delivered.

By chance, does anyone have a spare SMA female to UHF female (SO-239) adapter like this one? https://www.amazon.com/DHT-Electronics- ... B00CVQP7CW

I'd order those but changing shipping to the KOA pushes delivery out to next Wednesday at the earliest.

If you have a spare you can sell me or don't mind picking one up, I'd be more than happy to reimburse you.

Re: Hams at Ouray

Posted: Wed Jul 12, 2017 11:09 pm
by az chip
Derf,

I have one in the truck. Coming up Saturday.

Re: Hams at Ouray

Posted: Thu Jul 13, 2017 5:52 am
by derf
Sweet!

Re: Hams at Ouray

Posted: Mon Jul 24, 2017 9:00 am
by will e
Well, we didn't get to mess with the Ham's much in Ouray. Most trail rides were CB oriented.

I did try Engineer from KOA and was able to raise someone:

147.270+ 127.3 KB5ITT At Engineer Peak

This was with the base unit in my truck. Kenwood TM-d710. I will have to check on what power setting I had it on.

Craig and I had good communication running out to Ouray via Simplex. As you know it is much clearer than CB.

Also on a run with Jessie I used two handheld BAOFENG with rubbder ducks and set to a FRS frequency on low power and it worked great.

We ran through Silverton so quickly I didn't get to try: 147.375+ 156.7 KB5ITS Sliverton, Kendall Mountain. I will give that a shot next year.

I would have also like to try to get my APRS working. I put in my call sign. I am not sure what else I need to do to get it to work. It would be great to be able to send out text signals if hitting the repeaters isn't working.

Re: Hams at Ouray

Posted: Mon Jul 24, 2017 10:09 am
by REDONE
Same here. I ran my APRS for the drive out and that was it. On the plus side I was connected fairly consistently except over monarch. Not bad for a 5w beofeng and old Moto X!

Re: Hams at Ouray

Posted: Wed Aug 02, 2017 6:14 pm
by shimniok
I saw your track.

I had APRS working. But gave up on it after TC failed. Left everything at home. Just took CB :/

I designed a custom circuit board to interface the Raspberry Pi and to Radio Shack 2m and it actually worked out great.

Sent from my XT1096 using Tapatalk

Re: Hams at Ouray

Posted: Sun Jun 10, 2018 5:47 pm
by will e
Let's try to spend some time this year messing with the Hams!

Re: Hams at Ouray

Posted: Sun Jun 10, 2018 6:30 pm
by derf
Absolutely. I'm not sure exactly what setup I will have but I will have something.

Re: Hams at Ouray

Posted: Tue Jun 19, 2018 8:50 pm
by shimniok
I haven't installed anything in my 4runner yet...

Re: Hams at Ouray

Posted: Wed Jun 20, 2018 10:59 am
by will e
shimniok wrote:I haven't installed anything in my 4runner yet...
I will bring a couple of handhelds as well.

Re: Hams at Ouray

Posted: Wed Jun 20, 2018 2:33 pm
by shimniok
Cool. I will look you up if I can't find the charger for my Vertex 150 and don't get a mobile rig installed :)

Re: Hams at Ouray

Posted: Thu Jul 12, 2018 2:30 pm
by shimniok
1. Vertex VX-150, car charger, antenna adapter: check
2. Alinco DR-135T, magmount, newly installed in the 4Runner and tested: check
3. APRS setup: maybe.

Re: Hams at Ouray

Posted: Thu Jul 12, 2018 4:00 pm
by will e
A year later and I still haven't set up APRS. Well, at least the rig is permanently mounted.

Re: Hams at Ouray

Posted: Sat Jul 14, 2018 10:35 am
by shimniok
Here's a list of our callsigns (add yours if you don't see it), 2m repeaters, and FM simplex frequencies.

https://docs.google.com/document/d/1knv ... sp=sharing

Re: Hams at Ouray

Posted: Sat Jul 14, 2018 10:38 am
by REDONE
I was going to put my stuff in the table but a magical purple cursor did it for me right before my eyes! :P

Re: Hams at Ouray

Posted: Sat Jul 14, 2018 7:37 pm
by will e
shimniok wrote:Here's a list of our callsigns (add yours if you don't see it), 2m repeaters, and FM simplex frequencies.

https://docs.google.com/document/d/1knv ... sp=sharing

Nice!

Re: Hams at Ouray

Posted: Sat Jul 14, 2018 8:59 pm
by REDONE
Thanks shim!