Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
just FYI, parting out my 65/68 j3000. most people know it. easy two hours from ouray and can drop off smaller items or arrange for larger ones.
quick list:
whole truck as is (hd44 front was bad, pulled. can be on original d44 roller rigged up, possibly have j20 d44) $1k
or parted:
long bed thriftside with skirting, Willy's fenders, tailgate
$300 pickup in Ignacio only
cab with dash, column, uncracked windshield, slider rear big window. rubber lined and foil insulated. wiring..needs sorting. all gauges and switches. 68 title clean CO with vin plate. $500. pick up in Ignacio co only
rear j20 d60 4.09 with gm disc brakes and brackets. $500
possible delivery. needs little.
metal gas tank and skidplate. both were done up nice. $75
pm or discuss here. I won't be staying at the koa obviously but can swing in or meet up that week/weekend.
I font think the 327 era t18/d20 has same bolt patterns as 360 era..I know the bell obviously is different.. can't recall__, forgot more AMC stuff than I like to admit.
the smoking deal here for fsjers is the disced full floater rear d60. new bearings and gm discs and calipers.
Hello! I have a complete mostly new (3500 miles) QT that was rebuild with used cones about 6 years ago. I replaced the shift diaphragm and gaskets with NOS or new from crown parts. If anyone wants it I'll bring it along. $150, its what I paid for it so I figure that's fair.
"Wait, what's on fire!?" KJ7TCT
--------------------------------------------------------------
1976 Cherokee w/t 'Susan' 401/TH400/QT(PT)
FiTech Go EFI, Edelbrock Performer intake
3" Rough Country Springs, HEI Dizzy
-------------------------------------------------------------
2018 Cherokee Trailhawk V6 'Sedna'
I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.
My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
Grand_Wag_85 - be sure to remind me (like on 7/12 cause I forget) that you need this. It's yours. I do like good Colorado IPA's. (even tho I got this for free from the raffle, I STILL feel like this is a good reason for a 12 pack, but only if I can share it with others!!!)
Blake wrote:Grand_Wag_85 - be sure to remind me (like on 7/12 cause I forget) that you need this. It's yours. I do like good Colorado IPA's. (even tho I got this for free from the raffle, I STILL feel like this is a good reason for a 12 pack, but only if I can share it with others!!!)
No problemo. I'll be there by 7/12 so I'll remind you the week before. Also not sure if you like Founder's All Day IPA or if it's available in the Centennial State but I can get it out here if that's something you're also into
82 J10
77 J10 Golden Eagle 401
88 GW
You know it's bad when your car is on the EPA's 10 most wanted list!
will e wrote:I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.
My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)
If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
And if anyone happens to have a set of axle shafts (inners and outers) and hubs for a late ('87+) Ford Dana 60 and a driver's side (or both) shaft(s) for a Sterling 10.25" rear I might be interested. Just looking for spares.
I have a set of Cadillac front seats with console if interested I can send more pictures
and I can bring to Ouray in a few weeks. I want $200.00 for the three pieces.