2016 parts

For all discussions related to the annual FSJ invasion of Ouray

Moderators: shimniok, srobertsfsj

User avatar

Grand_Wag_85
Posts: 1792
Joined: Sat Aug 27, 2011 8:46 am

Re: 2016 parts

Post by Grand_Wag_85 »

I need a driver side Amber parking light for an 80's truck. I left the old one somewhere on Imogene Pass.
82 J10
77 J10 Golden Eagle 401
88 GW

You know it's bad when your car is on the EPA's 10 most wanted list!

Jeepin Divas 401
Posts: 66
Joined: Thu Oct 04, 2012 3:07 pm
Location: Dad's Garage

Re: 2016 parts

Post by Jeepin Divas 401 »

We have a few we can bring Sean or do you need it sooner.
1969 J-2000
350 Buick
Turbo 400/ dana 20
1977 J-10 frame and updated Dana 44's front and rear.

1964 Wagoneer
230 Tornado I-6 3 speed on the column
64,000 original miles
User avatar

Grand_Wag_85
Posts: 1792
Joined: Sat Aug 27, 2011 8:46 am

Re: 2016 parts

Post by Grand_Wag_85 »

Jeepin Divas 401 wrote:We have a few we can bring Sean or do you need it sooner.
Just bring them with you guys. I'm gonna throw an amber light bulb in the socket to be quasi legal.

Thanks!
82 J10
77 J10 Golden Eagle 401
88 GW

You know it's bad when your car is on the EPA's 10 most wanted list!

Nikkormat
Posts: 3623
Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City

Re: 2016 parts

Post by Nikkormat »

I'm going to bring a box of stuff and setup on my tailgate like Jerry does. Does anyone need dash wiring harnesses? Carburetors? NP208's?
Gabe, "reformed" Jeep hoarder.
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: 2016 parts

Post by jsinajeep »

Well there is no need for my tail gate set empty so I will be bring a bunch of TSM and Repair manual
and a few other parts. manual date from 65 to 91.
User avatar

derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2016 parts

Post by derf »

I'll be looking for manuals that cover a 1969 if you have them.
W0JPR

Check out my gear ratio calculator

If you can't fix it with a hammer or duct tape you have an electrical problem.

will e
Posts: 5104
Joined: Sat Aug 18, 2012 8:21 am

Re: 2016 parts

Post by will e »

I have some wide trac amc 20 axle shafts.
Dutchman Rear Alloy Axle Shafts

I also have a set of used 82 wide track cheroke axles shafts, front and rear. Fronts include the outers. Spares are a nice thing to have.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

AMCdealer
Posts: 56
Joined: Sat Oct 06, 2012 3:42 pm
Location: Full-Time RVer

Re: 2016 parts

Post by AMCdealer »

Grand_Wag_85 wrote:I've got 2 OE radiators BUT they're for the 258. Get me some measurements and I'll scope them out.
Don't think I'd have room to bring one home, now. Thanks, though!
AKA "SVO42" at IFSJA
User avatar

Grand_Wag_85
Posts: 1792
Joined: Sat Aug 27, 2011 8:46 am

Re: 2016 parts

Post by Grand_Wag_85 »

No problemo AMCDealer. Wish I was going thru your way I'd leave it at your place.

I'm looking for a steering column for an 86 GW with the new dash.
82 J10
77 J10 Golden Eagle 401
88 GW

You know it's bad when your car is on the EPA's 10 most wanted list!

will e
Posts: 5104
Joined: Sat Aug 18, 2012 8:21 am

Re: 2016 parts

Post by will e »

AMCdealer wrote:
will e wrote:I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.

My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

AMCdealer
Posts: 56
Joined: Sat Oct 06, 2012 3:42 pm
Location: Full-Time RVer

Re: 2016 parts

Post by AMCdealer »

will e wrote:
AMCdealer wrote:
will e wrote:I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.

My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.
Not sure if we'll have the room to bring it home now that we're driving the car out. Tow rig (Excursion) has issues we just discovered and there's not enough time to do all the necessary work to get plates on the Explorer. The 2 possible FSJs also need work and plates that we won't be able to complete in time. :( We'll know how much room after we pack the car Saturday, though!
AKA "SVO42" at IFSJA

will e
Posts: 5104
Joined: Sat Aug 18, 2012 8:21 am

Re: 2016 parts

Post by will e »

AMCdealer wrote:
will e wrote:
AMCdealer wrote:
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.
Not sure if we'll have the room to bring it home now that we're driving the car out. Tow rig (Excursion) has issues we just discovered and there's not enough time to do all the necessary work to get plates on the Explorer. The 2 possible FSJs also need work and plates that we won't be able to complete in time. :( We'll know how much room after we pack the car Saturday, though!
If I am towing the rig I will have plenty of room to bring it and take it back home if you don't have the room. No worries.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: 2016 parts

Post by jsinajeep »

I have a set of front and rear seats and console that fold forward from a Cherokee if anyone interested
in them I can bring to Ouray

csuengr
Posts: 1290
Joined: Sun Mar 24, 2013 10:24 am
Location: Sterling, CO

Re: 2016 parts

Post by csuengr »

A bit late to the party. I have a K&N filter for a stock air cleaner assembly. Currently dirty. Also have the air cleaner assembly. I have a complete set of front axle shafts for a passenger drop wide track D44. Full set of side glass for a Grand Wagoneer. A good NP229.
1977 Cherokee S, Ford 5.0, 5 speed, BW 1356, 33 x 10.50 BFG's. No longer my DD.
2007 Mercury Milan, 2.3L, 5-speed, now my DD. 29 mpg average.
User avatar

Grand_Wag_85
Posts: 1792
Joined: Sat Aug 27, 2011 8:46 am

Re: 2016 parts

Post by Grand_Wag_85 »

How much for the 229?
82 J10
77 J10 Golden Eagle 401
88 GW

You know it's bad when your car is on the EPA's 10 most wanted list!

csuengr
Posts: 1290
Joined: Sun Mar 24, 2013 10:24 am
Location: Sterling, CO

Re: 2016 parts

Post by csuengr »

I was thinking $50. Do you need the shift motor? I have a good one of those also.
1977 Cherokee S, Ford 5.0, 5 speed, BW 1356, 33 x 10.50 BFG's. No longer my DD.
2007 Mercury Milan, 2.3L, 5-speed, now my DD. 29 mpg average.
Post Reply