And we are back!!! (again)

Area to ask questions or post comments related to this forum.
User avatar
Stuka
Site Admin
Posts: 8702
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

And we are back!!! (again)

Postby Stuka » Sat Feb 28, 2015 1:09 pm

So, lets try this again shall we. I made the forum available last night (well, 1am PST technically) as it appeared it was working. But then at some point this morning (I have not narrowed down the exact moment yet) all the new post that were made vanished. So we are trying this again.

If you see anything that is not working correctly, let me know immediately!! Its is extremely important to catch any issues as early as possible.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
will e
Posts: 3403
Joined: Sat Aug 18, 2012 8:21 am

Re: And we are back!!! (again)

Postby will e » Sat Feb 28, 2015 1:30 pm

Hey, this time I had to log in.

Thanks for keeping this all up to date.

If you go to www.fsjnetwork.com and click on 'forums' it opens a new window. This leaves the old window open. A little annoying. ;)
81 Wagoneer - 'WILL E' Retired

82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CB/dual batts/custom TC skid plate

User avatar
Stuka
Site Admin
Posts: 8702
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: And we are back!!! (again)

Postby Stuka » Sat Feb 28, 2015 1:32 pm

Still have a lot of work to do to the main site.

And I did purge the session database, which is why you had to login again this time.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
fulsizjeep
Moderator
Posts: 4367
Joined: Sun Nov 06, 2011 7:21 am
Location: Mancos Valley, CO
Contact:

Re: And we are back!!! (again)

Postby fulsizjeep » Sat Feb 28, 2015 1:39 pm

I lost some dribble but it was not even cat kibble. ;)

Thanks Brandon!
Sent from my IBM 5150 using TN5250 emulation.

Flint Boardman ~ http://jubileejeeps.org
Embracing the Borg Warner QuadraTrac since 1980 http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s, a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20

User avatar
Stuka
Site Admin
Posts: 8702
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: And we are back!!! (again)

Postby Stuka » Sat Feb 28, 2015 1:42 pm

Oh also, at least for me the site feels faster. Let me know if anybody has any slow downs like before.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
will e
Posts: 3403
Joined: Sat Aug 18, 2012 8:21 am

Re: And we are back!!! (again)

Postby will e » Sat Feb 28, 2015 2:39 pm

it does seem snappy!
81 Wagoneer - 'WILL E' Retired

82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CB/dual batts/custom TC skid plate

User avatar
fulsizjeep
Moderator
Posts: 4367
Joined: Sun Nov 06, 2011 7:21 am
Location: Mancos Valley, CO
Contact:

Re: And we are back!!! (again)

Postby fulsizjeep » Sat Feb 28, 2015 2:45 pm

dang right skippy!
Sent from my IBM 5150 using TN5250 emulation.

Flint Boardman ~ http://jubileejeeps.org
Embracing the Borg Warner QuadraTrac since 1980 http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s, a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20

User avatar
carnuck
Posts: 3807
Joined: Sun Mar 04, 2012 2:48 pm
Location: Lynnwood, WA
Contact:

Re: And we are back!!! (again)

Postby carnuck » Thu Mar 05, 2015 3:25 pm

double speed here!
GETTING READY TO MOVE FINAL SALE!

http://tinyurl.com/jimsclads

Honcho rebuild thread http://www.fsjnetwork.com/forum/viewtopic.php?f=15&t=2652

Full Size Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

User avatar
srobertsfsj
Moderator
Posts: 701
Joined: Fri Dec 16, 2011 2:01 pm
Location: Gardnerville, NV

Re: And we are back!!! (again)

Postby srobertsfsj » Sat Apr 25, 2015 1:58 pm

w00t! I have two pics on the main page. Sweet! :)
Scott R.

'86 Grand Wagoneer "Super Chief" 5.3L drivetrain/ WT conversion / TT's Fabworks SOA and SF / 35x12.5x16 BFG M/T KM2 http://www.fsjnetwork.com/forum/viewtopic.php?f=15&t=294&p=3364

"After years of being paranoid about my Jeep’s temp going towards that 220F mark, I’m realizing that if it was real problem, Jeep engineers would have painted that area RED." - FSJ Guy


Return to “Forum Related”

Who is online

Users browsing this forum: No registered users and 1 guest